Brayer BR4914 - Инструкция по эксплуатации - Страница 7

7

EN

• 

Remove the power plug from the mains socket.

• 

Fill the tank (2) with water, install it to its place and 

switch the unit on.

• 

After the operation switch the air humidifier off and 

unplug the power cord plug from the mains socket.

CLEANING AND  MAINTENANCE

• 

Hard water causes the appearance of mineral scale 

inside the process chamber (5), on the sprayer and 

in the water tank (2); mineral scale leads to improper 

operation of the humidifier.

• 

It is recommended to clean the process chamber (5) 

and the sprayer weekly, and to change water in the 

water tank (2). 

• 

If you are not going to use the Ultrasonic humidifier 

for a long time: 

- pour the water out of the water tank (2) and the 

process chamber (5)

- wash and clean the process chamber (5) and the 

sprayer

- wash the water tank (2)

- dry the unit thoroughly and take it away for 

storage.

WARNING! 

Always switch the Ultrasonic humidifier off and unplug 

it before maintenance works or cleaning.

WEEKLY CARE

• 

Ceramic water filter (4) is permanent and it doesn’t 

have to be replaced for a long period of time. It is 

recommended to remove the filter (4) every 7 days 

and wash it with warm tap water. After that install the 

filter (4) back to its place.

• 

Note:

 — the ceramic filter (4) cannot clean the water 

from mineral deposits fully and it serves as additional 

means of cleaning of the water.

• 

Once a week wash the water tank (2), the process 

chamber (5) and the sprayer with warm water and 

neutral detergent and rinse thoroughly with water.

• 

Add some detergent drops on the sprayer and wait 

for several minutes. Remove the deposits from the 

sprayer surface with a brush (pic. 7).

• 

Notes:

 — you can use scale removal substances for 

electric kettles as a cleaning agent for the process 

chamber (5) and the sprayer strictly following the 

instruction.

• 

Clean the unit body (6) with a slightly damp cloth and 

then wipe the body (6) dry.

• 

Do not immerse the unit body (6), the power cord and 

the power plug into water or other liquids. Provide 

that no liquid gets inside the unit body (6).

• 

Do not use solvents or abrasives to clean the surface 

of the body (6) and the water tank (2).