Brayer BR4910 - Инструкция по эксплуатации - Страница 6

6

EN

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative 

temperature, unpack it and wait for 3 hours before 

using it.

• 

Use the humidifier at the room temperature from 

+10° С to +40°С and

• 

relative humidity less than 80%.

• 

Unpack the unit and remove all the packaging 

materials. 

• 

Keep the original package.

• 

Read the safety measures and operating 

recommendations.

• 

Check the delivery set.

• 

Examine the unit for damages, in case of damage do 

not plug it into the mains.

• 

Make sure that the indicated specifications of the 

power supply voltage of the unit correspond to the 

specifications of your mains. When using the unit in 

the mains with 60 Hz frequency, the unit does not 

need any additional settings.

USING THE AIR HUMIDIFIER

• 

Remove the lid (1) from the reservoir (2) (fig. 1).

• 

Fill the water tank (2) with the required amount of 

water.

• 

Notes:

 — if the tap water used is hard, use water 

cleaned with household filters or mix tap water with 

distilled water in proportion 1:1.

• 

Install the lid (1) on the reservoir (2) (fig. 3). 

• 

Wait till the process chamber (3) is filled with water.

• 

Insert the power plug into the mains socket. You’ll 

hear a beep.

• 

Switch the air humidifier on pressing the button (5) 

«   », the air humidifier will switch on The humidifier 

operating modes will be displayed by the indicators 

(4) «

HUM

HUM

Sleep

Sleep

».

• 

By repeatedly pressing the button (5) «   », select 

the humidification intensity level « 

 », the 

mode of maintaining the relative humidity in the room 

«

HUM

HUM

» or the night mode «

Sleep

Sleep

».

• 

In the mode of maintaining the relative humidity «

HUM

HUM

», 

the humidifier will automatically set the humidification 

intensity which is displayed by the indicators (4) « 

 » depending on the relative humidity in the 

room.

• 

• The relative humidity in the room is indicated by the 

colored illumination of the button (5) «   »:

- Orange — low relative humidity; 

- Green — relative humidity in the room 

corresponds to the humidity installed by default;

- Blue — high relative humidity.

• 

By repeatedly pressing the button (5) «   », select 

the night mode «

Sleep

Sleep

». The humidifier will switch on to 

the minimum humidification intensity in night mode, 

and the indicator (4) «   » will light up.

• 

If the water tank (2) is empty, the button (5) «   » 

lighting will light up red.