Brayer BR4700 - Инструкция по эксплуатации - Страница 6

6

EN

THE UNIT IS INTENDED FOR HOUSEHOLD USE 

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL 

OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative 

temperature, unpack it and wait for 3 hours before 

using it.

• 

Use the humidifier at the room temperature from 

+10° С to +40°С and

• 

relative humidity less than 80%.

• 

Unpack the unit and remove all the packaging 

materials. 

• 

Keep the original package.

• 

Check the delivery set.

• 

Read the safety measures and operating 

recommendations.

• 

Examine the unit for damages; if the unit is damaged, 

do not plug it into the mains.

• 

Make sure that the indicated specifications of the 

power supply voltage of the unit correspond to the 

specifications of your mains. 

USING THE ULTRASONIC HUMIDIFIER

• 

Remove the water tank (1) from the unit body (6), 

remove the lid with the «mist» release opening (Abb. 

1).

• 

Turn over the water tank (1), turn the lid (4) 

counterclockwise and remove it (Abb. 2).

• 

Before the first use it is recommended to remove the 

filter (3) turning it counterclockwise and to put the 

filter (3) into a container with water for 5-10 minutes.

• 

Install the filter (3) on the lid (4) and thread it rotating 

clockwise.

• 

Fill the water tank (1) with the required amount of 

water (Abb. 3).

• 

Notes:

 — if the tap water used is hard, use water 

cleaned with household filters or mix tap water with 

distilled water in proportion 1:1.

• 

Install the lid (4) on the water inlet (2) and thread it 

turning clockwise. 

• 

Place the filled water tank (1) on the unit body (6).

• 

Wait till the process chamber (5) is filled with water.

• 

If you want to use the aromatization function, remove 

the container (7). Add some drops of water-soluble 

aromatic oil and install the container (7) back to its 

place (pic 4). 

• 

Notes:

- use water-soluble aromatic oils only

- if you are not going to use the aromatization 

function, remove the container (7), wash it with 

water, dry and install back to its place

• 

Insert the power plug into the socket.

• 

Switch the Ultrasonic humidifier on by turning the 

knob (9) clockwise, the indicator will light up green.

• 

Set the mist release intensity by turning the knob (9).

• 

To turn the illumination on press the button (8), to 

switch the illumination off press the button (8) again.