Beurer LB 44 - Инструкция по эксплуатации - Страница 18

Увлажнители Beurer LB 44 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 76
Загружаем инструкцию
background image

18

9. What if there are problems?

Problem

Cause

Solution

No LED display

The mains cable is not plugged 

in.

Connect the plug.

The control dial is at its mini-

mum position.

Turn the control dial clockwise towards the 

maximum position.

Red LED

The water level is too low; the 

water tank is empty.

Fill the water tank.

No mist is produced

The LED lights up green.

Turn the control dial clockwise towards the 

maximum position.

The LED lights up red.

Fill the water tank.

The LED display does not light 

up.

Connect the plug. 

The mist has a strange 

smell

The device is new.

Remove the water tank, turn the screwed plug 

and remove it. 

Air the open, emply water tank in a cool, dry 

place for twelve hours.

Stale or dirty water.

Empty the base unit and the water tank and 

clean them thoroughly.

Fill the water tank with fresh water.

Strange noise

The water tank is not positioned 

correctly on the base unit.

Lift up the water tank and position it correctly 

on the base unit.

The tank should sit tightly on the base unit.

There is too little water in the 

water tank.

Fill the water tank.

The device is not level and 

unstable.

Place the device on a firm, level surface.

Mist escapes underneath 

the water tank

The water tank is not positioned 

correctly on the base unit.

Lift up the water tank.

Check whether the join between the base unit 

and water tank is clean.

Clean if required.

Position the water tank correctly on the base 

unit.

The tank should sit tightly on the base unit. 

10. Technical data

Dimensions (LxWxH)

approx. 25 cm x 12 cm x 34 cm

Cable length

approx. 1.5 m

Weight when empty

approx. 1.5 kg 

Mains voltage/frequency

100 – 240 V AC / 50/60 Hz

Nominal power

20 watts

Room size

up to 25 m² 

Capacity

approx. 2.8 litres

Evaporation output

220 ml/hour

Signs and symbols

The unit is double-protected and thus corresponds to protection 

class 2.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Beurer LB 44?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"