Увлажнители Timberk THU UL 43 E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM2020
15
Every day fill the tank with fresh filtered water and keep the unit clean .
8.
OPERATION OF THE DEVICE
Control panel
- On/Off
- Steam intensity adjustment / SLEEP mode
-
Timer settings
-
Constant humidity switch
Switching on
Install the appliance vertically on a flat and dry surf ace, fill the tank with water then connect the device to the
power line. Press the
button. The device will start to operate in low steam intensity mode. At the ver y
beginning of operation, the atomizing level may appear unstable, which is caused by the temperature
difference and water quality. It will take a short period time f or this process to stabilize.
Adjusting steam outlet intensity
Press the
button to adjust steam outlet intensity and select SLEEP mode. After turning on th e
device, it will operate in low steam intensity mode. Press the
button one time to select medium
steam intensity. Press the
button again to select high steam outlet intensity. Press the but ton third
time to enter SLEEP mode.
The more steam comes out, the stronger and f aster air humidification will be. Comf ortable conditions are
reached at 40 to 60% relative air humidity. You can yourself determine the comf ortable humidity level or use
hygrostat function by pressing the
button.
ATTENTION!
If a large amount of condensate is generated on the upper part of the appliance when it is operating, then
you need to decrease the steam outlet intensity by turning on/off and steam outlet intensity knob
counterclockwise.
ATTENTION!
In case of water shortage the
button will light in red.
