Timberk THU ADF 01 - Инструкция по эксплуатации - Страница 6

www.timberk.com • electric humidifier

6

Before starting cleaning of the device, make sure that the power supply unit 

is disconnected from the wall outlet. Otherwise, this may result in electric 

shock.
Before starting cleaning, wait for full cooldown of water in the appliance 

base to exclude burning of hands.
Clean the appliance once or twice a week.
8.1. To wipe the outer surface of the appliance, use damp and soft cloth.
To avoid electric shock, do not scratch or damage the appliance elements 

during cleaning.
Do not use solvent, gasoline, dimethylbenzene, hard brush, talc powder, 

and other substances, besides water, for cleaning of the appliance.
8.2. Wipe off remains of water inside the tank with damp and soft cloth.
To remove remains of water on small parts, you can use the soft brush and 

then wipe them again with soft cloth.
8.3. If dirt is formed on the membrane, clean it using the soft brush.
8.4. Use the soft brush to wipe off remains of water on the pulverizer 

surface and then wipe it again with soft cloth.
8.5. Wash the water tank and pulverizer with clean water.
After removal of water remains from the pulverizer surface, wipe it with 

soft cloth. Clean the outer surface of the device with damp and soft cloth.

8. CLEANING AND MAINTENANCE 

Switching on and selecting mode

Connect the appliance to the electrical mains (after the water tank is 

filled). To select a contituons spray operation. Press the «MIST» button 

once. Steam will begin to escape from the pulverizer. When operating in 

this mode, the device automatically switches off after 3 hours. At the very 

beginning of this operation, the pulverization rate may appear unstable, 

which is caused by temperature difference and water quality. Short time 

will be required to stabilize this process. To select a cyclic mode spray 

intervals / pause 15 seconds, press the «MIST» twice. When operating in 

this mode, the device automatically switches off after 6 hours.

Colour backlighting

Press the «Light» button once to enable backlighting of the appliance. 

Colors (red, green, blue, or their combination). To select a single color 

backlight press again button «Light» during  glow. Subsequent pressing 

the button «Light» will turn off the backlight color of the device.

Bluetooth function

When the Bluetooth function is active, you can use the appliance as a 

wireless musical speaker transmitting sound from devices with support of 

data transfer via Bluetooth.
To  enable  the  Bluetooth  function,  press  and  hold  for  2  seconds  the                  

«

» button until it beeps. After that, enable the Bluetooth function on the 

transmitting device, find the device with «music SPA» name and connect 

to it.
To disable the Bluetooth function, press and hold for 2 seconds the «

» 

button until it beeps.

Air aromatization

Add 2-3 drops of aromatic oil to the water tank. Aromatic oil is not included 

to the package.

Switching off

For switch off  press the button «MIST» once if the device worked in a cyclic 

mode spray or twice if the unit operates continuously spraying.

7. OPERATION

Fig. 3