Timberk T-HU4-A16M-W - Инструкция по эксплуатации - Страница 18

Увлажнители Timberk T-HU4-A16M-W - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 44
Загружаем инструкцию
background image

 

IM2021 

 

18 

 

 

Every day fill the tank with fresh filtered water and keep the unit clean. 

 
8.  OPERATION OF THE DEVICE 

Switching on 

Install  the  appliance  vertically  on  a  flat  and  dry  surface,  fill  the  tank  with  water  then 
connect the device to the power line. Turn on/off and steam outlet  intensity knob all the 
way  to  the  right.  The  appliance  will  switch  on,  the  blue  operation  indicator  will  light  up 
on  the  control  panel  and  steam  will  start  coming  from  the  atomizer.  At  the  very 
beginning  of  operation,  the  atomizing  level  may  appear  unstable,  which  is  caused  by 
the  temperature  difference  and  water  quality.  It  will  take  a  short  period  time  for  this 
process to stabilize. 

 
Adjusting steam outlet intensity 

You can  adjust steam intensity  by  turning on/off and steam outlet intensity knob to the 
left or right.  
Comfortable  conditions  are  reached  at  40  to  60%  relative  air  humidity.  You  can 
yourself  determine  the  comfortable  humidity  level  or  use  a  special  device  called  a 
hygrometer (not included in the set), measuring the relative humidity level.  
 

ATTENTION! 

If a large amount of condensate is generated on the upper part of the appliance when it 
is operating, then you need to decrease the steam outlet intensity by turning on/off and 
steam outlet intensity knob counterclockwise. 
 

Automatic switching off when there is no water 

When  water  level  in  the  tank  drops  below  minimal  level,  the  ultrasonic  membrane  will 
automatically  switch  off  and  the  red  indicator  will  light  up  on  the  control  panel.  To 
continue  operation  of  the  appliance  it  is  necessary  to  fill  the  tank  with  water  according 
to  «Filling  the  water  tank»  paragraph,  and  then  connect  the  appliance  to  the  electric 
mains. 
 

Adding essential oils 

Pour  three  or  five  drops  of  essential  oil  in  the  aroma  box  (aroma  box  is  located  under 
the  water  filing  cap.  It  has  the  cloth  on  which  the  oil  must  be  put).  After  adding,  outlet 
steam will contain the smell of essential oils. 

 
ATTENTION! 

Add the essential oil only in the aroma box 
Don’t pour the oil directly in the water 
Water-soluble essential oils must be used 
 
 

Switching off 

To  switch  the  appliance  off,  turn  on/off  and  steam  outlet  intensity  knob  all  the  way  to 
the left and disconnect the appliance from the electric mains. 

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

  1. Наталья

    При полном резервуаре горит красная лампочка, должна загорется синяя. Не исправен?

    Ответить
  2. Наталья

    Горит красная лампочка, должна загорется синяя. Не рабочий?

    Ответить
Часто задаваемые вопросы
Как посмотреть инструкцию к Timberk T-HU4-A16M-W?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"