Увлажнители Timberk T-HU4-A100E-WF - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM2021
17
Do not sit, stand, or place heavy objects on the
humidifier.
To prevent damage to the humidifier, do not add
essential oils, preservatives, flavorings, or other
impurities to the water in humidifier. The
manufacturer and seller are not responsible for the
damage to the humidifier in case of ignoring this
warning.
NOTE
High-frequency vibrations of the membrane of the ultrasonic humidifier are not
audible and are completely safe for people and pets.
If the device was at a temperature below 0ºC for some time, it must be kept at
room temperature for at least 2 hours before turning it on.
Do not use accessories that are not supplied.
3. APPOINTMENT OF THE DEVICE
A humidifier increases relative air humidity in a room and stabilizes its microclimate,
allowing to avoid harmful conditions of low humidity. Comfortable conditions are
achieved at relative air humidity of 40 to 60%. Insufficient air humidity results in
dehumidification of mucous membranes which is the cause of decrease in immunity,
head ache, cracking of lip
s, “sandpaper” in the eyes, also
insufficient air humidity
enables development of infection and causes respiratory illnesses, fatigue, increased
eye fatigue and worsening of concentration, and has negative effect on pets and indoor
plants, causes increased dust generation and electrostatic charging of synthetic
fabrics.
4. SPECIFICATIONS
Specifications of the device are shown in Table 1.
Table 1
Parameters
Units
T-HU4-A100E-WF
Capacity of humidity
ml/h
400
Power supply
V/Hz
220-240~/50
Water tank volume
L
4
Rated power consumption
W
30
Rated current
А
0.2
Electrical protection class
-
Class II
Device dimensions
mm
197x205x299
Packing dimensions
mm
230x230x335
Net weight
kg
1.11
Recommended area
m
2
20-30
