Tefal Aqua Perfect HD5236F0 - Инструкция по эксплуатации - Страница 9

9

EN

• Never cover the appliance.

• Never use the appliance without its nozzle.

• Never touch the appliance with wet hands.

• Never move the appliance when it is in operation.

• Never put water in the evaporation duct, it could cause an overflow.

• Never use the appliance near to inflammable objects and materials (curtains, aerosols, solvents, etc.…). 

• Never leave water in the tank when the appliance is not being used.

• Make sure the water in the tank is replaced before each time of use.

•  Please be aware that high levels of humidity may encourage biological organisms to grow in the 

environment.

• Never allow absorbent materials such as carpet, curtains, or tablecloths to become humid or damp…

•  If the appliance is to be left unattended for a prolonged period of time: it is important to turn it off, unplug 

it, empty the water tank and the vaporization compartment, then clean and allow the appliance to dry.

• Empty and clean the humidifier before storage. Clean the humidifier before next use.

•  Clean the water tank. Regular cleaning is recommended; approximately once a week (depending on 

use). See MAINTENANCE paragraph.

•  WARNING : Micro-organisms can grow in the water tank and be blown in the air when the water tank is 

not cleaned regularly and properly (see MAINTENANCE paragraph).

•  Be aware that high humidity level may encourage the growth of biological organisms in the environment.

•  Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn 

the output of the humidifier down. If the humidifier output volume cannot be turned down, use the 

humidifier intermittently.

STARTING THE APPLIANCE (3)

Before using the appliance for the first time, check that your voltage matches the one indicated on 

the appliance.

Your appliance can be operated from an electric socket without an earth contact. It is a class II (double 

insulated   ) appliance. 
Before switching on your appliance make sure that:

• the appliance is positioned in accordance with these instructions,

•  the appliance is on a flat and stable horizontal surface which is not sensitive to humidity and at least 

7,87 inches from any other object,

• the air inlet grids located under the appliance are totally unobstructed.

How to use your appliance:

1.   Remove the top cover (5). 

2.   Turn 1/4 up the safety lock (2) located between the base and the water tank and lift the water tank 

thanks to the carrying handle (6).

3.   Unscrew the tank stopper (7).

4.   Clean the tank (see paragraph on CLEANING) and fill it with cold water (minimum 0.5 gallon/ 

maximum 1.55 gallons). 

PLEASE NOTE: We advise you to use slightly hard water to avoid the appearance of white dust; you 

can use tap water, bottled water, distilled water or boiled water.

If you live in a hard water area, use clean, cool tap water. Please remember that the tank must always 

be filled with cold water.

5.  Tighten the stopper and check that there are no water leaks.

6.  Check that the base of the appliance is clean and that there are no foreign objects. 

7.  Check that the water level sensor is not obstructed.

8.  Reposition the tank on the base.

WARNING : BE SURE THE WATER TANK IS WELL PLUGGED ON THE WATER BASE.

9.   Turn 1/4 down the safety lock (2) located between the base and the water tank, to lock the water 

tank on the base.

10.   Adjust the nozzle so that the steam is not directed at an obstacle, which could adversely affect the 

humidity regulation.

11.  

Wait for forty seconds

 for the water fill in the vaporization compartment.

12.  Plug the appliance in.

13.  Turn the appliance on. The digital screen lights up and the device starts directly in AUTO 

COMFORT.