Увлажнители Marta MT-2669 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
MT-2669
7
BUTTONS INSTRUCTION
ON/OFF button:
You can switch the machine on and off by one pressing of the button.
First pressing is on and enter into low intensity
Second pressing is middle intensity.
Third pressing is high intensity.
The fourth pressing is off the machine.
ION button:
You can switch the ionization mode on and off by one pressing of the button.
Heating button:
Press this button to get warm mist from the humidifier .warm mist takes 10~15 minutes to attain its level and it achieves up to the 45~50 degree Celsius. If you run the unit for about 20 minutes it starts
producing the warm mist. This mist will not be hot it would just be warmer as compared to the room temperature. The warm mist light indicator is on and if you place your hand over the top outlet you will feel
the warm mist.
OPERATION INSTRUCTION
First Operation, put unit in the room temperature for half of an hour before running.
It is recommended to use the unit under temperature of 20 degree C, relative humidity less than 80
％
RH.
Use clear water not over 40 degree C
Check the water basin, make sure it is clear.
Connect the power plug and switch on the unit (NEVER RUN THE UNIT WHEN THERE IS NO WATER IN WATER BASIN), the main connection lamp will be on. The unit starts working.
INSTRUCTIONS TO USAGE:
Put the machine on a flat surface.
Take the water tank out of the unit, open the water tank cover and fill the tank with clear water. Close the cover and put th e tank onto the base unit carefully..
Put the nozzle and top cover into the socket on top of the water tank.
Check if the rated voltage meets the input voltage, and plug into the socket.
Touch the machine button On/OFF
, the machine begins to work with mist output with low speed.
Touch
again, it have low (violet indication), middle (green indication), high (blue indication) mist for your adjustment.
Touch the ION button
to start or stop the ionization function.
