Утюги Zelmer ZIR0500 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
13
PL
EN
Troubleshooting
Problem
Possible cause
Solution
Soleplate is not
heating even
though iron is
turned on.
Connection problem
Check main power supply cable plug and
outlet.
Temperature control is in “min”
position
select adequate temperature
Iron does not
produce steam
Not enough water in tank
Fill water tank
Steam control is selected in non-
steam position.
Set steam control between positions of
minimum steam and maximum steam
(see “iron chart”)
.
Selected temperature is lower than
that specified to use with steam.
Select a higher temperature
Steam jet and
vertical steam jet
function does not
work
Steam jet function was used very
frequently within a short period.
Put iron on horizontal position and wait
before using steam jet function.
Iron is not hot enough
Adjust to higher temperature to steam
ironing. Put iron in vertical position and
wait temperature indicator light becomes
fixed.
The iron is
leaking
The temperature setting is too low
to produce steam.
The variable steam knob must be set on
“0” position until the iron is hot.
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal
framework applicable in the European Union for the disposal and reuse of waste electronic
and electrical devices. Do not dispose of this product in the bin, instead going to the electrical
and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product
.
