Утюги VITEK VT-1236 VT - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
ENGLISH
STEAM IRON
Instruction manual
The iron is intended for ironing clothes, bedding
and for vertical steaming of fabrics.
Description
1. Water spray nozzle
2. Water inlet lid
3. Continuous steam supply knob
4. Burst of steam button
5. Water spray button
6. Handle
7. Pilot lamp of the heating element
8. Iron base
9. Water tank
10. Temperature control knob
11. Self-clean mode button «Self Clean»
12. «MAX» water level mark
13. Soleplate
14. Beaker
SAFETY MEASURES
Before using the unit, read this instruction
manual carefully and keep it for future
reference.
Use the unit according to its intended purpose
only, as it is stated in this user manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to his/
her property.
•
Before switching the iron on, make sure that
the mains voltage corresponds to the iron
operating voltage.
•
The power cord is equipped with a “euro-
plug”; plug it into the socket with a reliable
grounding contact.
•
To avoid fire, do not use adapters for con-
necting the unit to the mains.
•
To avoid mains overloading, do not switch
on many electrical appliances with high
power consumption at the same time.
•
Do not fill the water tank with scented liq-
uids, vinegar, starch solution, descaling
reagents, chemicals etc.
•
Provide that the power cord is not on the
ironing board and make sure that it does not
touch hot surfaces.
•
Do not leave the unit unattended. During
operation breaks put the iron on the base (in
vertical position).
•
Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off.
•
Always unplug the iron if you do not use it.
•
To unplug the iron always hold the power
plug, never pull the power cord.
•
To avoid electric shock do not immerse the
iron, the power cord and the plug into water
or any other liquids.
•
Before taking the iron away, let the unit cool
down completely and pour out the remain-
ing water.
•
Clean the unit regularly.
•
Do not immerse the unit body, the power
plug or the power cord into water or
other liquids.
•
Do not touch the unit body and the power
plug with wet hands.
•
Do not allow children to touch the unit body
and the power cord during the unit opera-
tion.
•
Do not leave children unattended. Do not
allow children to use the unit as a toy.
•
For children safety reasons do not leave
polyethylene bags, used as packaging,
unattended.
Attention!
Do not allow children to play with
polyethylene bags or packaging film.
Danger
of suffocation!
•
Do not disassemble the unit by yourself, if
any malfunction is detected or after the iron
was dropped, apply to the nearest autho-
rized service center.
•
Transport the unit in the original package
only.
•
Keep the unit out of reach of children and
disabled persons.
•
During ironing and after it do not touch
the unit surface marked with the
symbol. Danger of burns!
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature, it is necessary to keep it for
at least two hours at room temperature
before switching on.
VT-1236.indd 4
02.12.2013 9:20:53
