VITEK VT-1210 VT - Инструкция по эксплуатации - Страница 7

7

              ENGLISH         

•  Put the iron on the base (9). 
•  Insert the power plug into the outlet.
•  Set the temperature regulator (11) to the 

MAX. temperature: “

max

” the (9) indica-

tor will light up. 

• 

When the soleplate temperature (13) 
reaches the desired temperature point, 
the (9) indicator will go out, you can start 
cleaning of the iron chamber.

•  Unplug the iron, set the temperature reg-

ulator (11) to the 

«

MIN

» position

.

•  Pull the plug out of the socket.  
•  Hold the iron above the sink, press and 

hold the button (14).

•  Boiling water together with scale will be 

throwing out from the openings in the 
iron soleplate (13).

•  Slightly sway the iron back and forth, un-

til water goes out of the water tank (10).

•  Place the iron on the base (8) and let it 

cool down completely.

•   When the soleplate (13) cools down com-

pletely, wipe it with a dry cloth.

•   Before you take the iron for storing, make 

sure that there is no water in the water 
tank (10) and that the iron soleplate (13) 
is completely dry. 

CARE AND CLEANING

•  Before cleaning the iron, make sure that it 

is turned off and has cooled completely. 

•  W ipe the iron's outer surface with a damp 

cloth and then wipe dry. 

•  Sediment on the iron soleplate can be 

removed with a cloth soaked in vinegar-
water solution. 

•  After removing sediment, polish the sole-

plate with a dry cloth. 

•  Do not use abrasive substances to clean 

the soleplate and body of the iron. 

•  Avoid touching the iron soleplate with 

sharp metal objects. 

STORAGE

•  Turn the temperature regulator (11) anti-

clockwise till MIN position, set the steam 

release regulator (3) to the steam release 
OFF position. 

•  Remove the power plug from the outlet. 
•  Open the water tank lid (2), turn over the 

iron and pour out any remaining water 
from the water tank (10).

•  Close the lid (2).
•  Set the iron vertically and allow it to cool 

completely. 

•  Keep the iron at dry cool place in vertical 

position out of the reach of children. 

TECHNICAL CHARACTERISTICS

Power requirements: 220-240 V ~ 50 Hz
Power consumption: 1850-2200 W

Specifications subject to change without 
prior notice.

MINIMUM SERVICE LIFE - 3 YEARS

GUARANTEE

Details regarding guarantee conditions can 
be obtained from the dealer from whom 
the appliance was purchased. The bill of 
sale or receipt must be produced when 
making any claim under the terms of this 
guarantee.

This product conforms to the 
EMC-Requirements as laid down 
by the Council Directive 89/336/
EEC and to the Law Voltage 
Regulation (73/23 EEC)

VT-1210.indd   7

VT-1210.indd   7

22.07.2009   17:18:36

22.07.2009   17:18:36