Утюги VITEK VT-1205 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IMPORTANT SAFEGUARDS
1.
Read all instructions before use.
2.
Ensure the voltage on the Rating Label is the same as that in your home.
3.
Use the iron only for its intended use.
4.
The iron should always be turned to off before plugging or unplugging from
the wall socket. Never yank the cord to disconnect from the wall socket;
instead. Grasp plug and pull to disconnect.
5.
Do not operate iron with a damaged cord/plug or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not disassem-
ble the iron, take it to a qualified serviceman for examination and repair.
Incorrect reassemble can cause a risk of electric shock when the iron is
used.
6.
Take care: If you are leaving the appliance momentarily, always switch it off,
remove the plug from the socket and stand the iron on its base.
7.
Close supervision is necessary for any appliance being used by or near
children. Do not leave the iron unattended while connected or on an ironing
board.
8.
To protect against a risk of electric shock, do not immerse the iron in water
or other liquids.
9.
Burns can be occur from touching hot metal parts, hot water or steam. Use
caution when you turn a steam iron upside down-there may be hot water in
the reservoir.
10. Do not allow cord to touch hot surfaces. Let the iron cool completely before
putting away, loop cord loosely around the iron when storing.
11. Always disconnect the iron from the electrical socket when filling with water
or emptying and when not in use.
12. To avoid a circuit overload, do not operate another high wattage appliance
on the same circuit.
13. Prevent water over flow, do not fill water over max level.
14. Save these instructions.
NOTE:
When using the iron for the first time test on an old piece of fabric to ensure the
Soleplate and water tank are completely clean.
The iron may slightly smoke when switched on for the first time-this is normal
and will soon cease.
3
18
ENGLISH
1205new.qxd 01.07.03 14:57 Page 6
