Taurus Quios 3000 - Инструкция по эксплуатации - Страница 10

INSTRUCTIONS FOR USE

BEFORE USE:

 - Peel off appliance’s protective film.
 - Make sure that all the product’s packaging has 

been removed.

 - Some parts of the appliance have been lightly 

greased, consequently, the appliance may give 

off a light smoke the first time it is used. After a 

short time, this smoke will disappear.

 - Prepare the appliance according to the function 

you wish to use:

FILLING WITH WATER:

 - It is essential to have filled the tank with water to 

be able to work with steam.

 - Open the lid on the filling spout.
 - Fill the tank, taking care to respect the MAX 

level (Fig. 1).

 - Close the filling spout lid.

USE:

 - Unroll the cable completely before plugging it in.
 - Connect the appliance to the mains.
 - Turn the thermostat control to the desired tem-

perature position.

 - Do not use temperatures higher than those 

indicated on the garments to be ironed.

● Temperature for synthetic fibres (Polyester, 

Nylon…).
●● Temperature for silk, wool. (Minimum 

temperature for ironing with steam)
●●● Temperature for cotton. 

Max 

Temperature for linen.

 - If garment has various kinds of fibres, select the 

temperature for the fibre that requires the lowest 

temperature. (For example, select the tempera-

ture for polyester for a fabric made out of 60% 

polyester and 40% cotton).

 - Wait until the pilot light (F) has gone out, indica-

ting that the appliance has reached an adequate 

temperature.

 - During use the pilot light (F) will automatically 

flash on and off, indicating that the heating 

elements are operating in order to maintain the 

desired temperature.

DRY IRONING:

 - The appliance has a steam flow regulator 

which, when set to 1, allows dry ironing (without 

steam).  

STEAM IRONING:

 - It is possible to iron with steam whenever the 

tank has water and the adequate temperature 

is selected.

STEAM FLOW CONTROL:

 - The appliance has a (C) control knob for adjus-

ting the steam flow.

SPRAY:

 - The spray can be used in both steam and dry 

ironing.

 - Press the spray button ( A ) to use this opera-

tion. 

 - The spray button has to be pressed repeatedly 

to release the first spray.

STEAM BLAST:

 - This function provides extra steam for removing 

creases.

 - Press the steam blast button ( B ). Wait a few 

seconds until the steam penetrates the fibres of 

the garment before pushing the button again. 

For optimum steam quality, do not apply more 

than three successive blasts.

 - The spray button has to be pressed repeatedly 

to release the first spray.

VERTICAL IRONING:

 - It is possible to iron hanging curtains, items 

of clothing on their own hanger, etc. To do so, 

follow these instructions:

 - Select the iron’s maximum temperature by tur-

ning the iron’s temperature regulator clockwise. 

(Fig 2)

 - Iron from top to bottom while pressing the steam 

control ( B ). Important: for cotton and linen, it is 

recommended to put the base of the iron in con-

tact with the material. For other more delicate 

fabrics, it is recommended to keep the base of 

the iron a few centimetres away.

ONCE YOU HAVE FINISHED USING THE 

APPLIANCE:

 - Select the minimum position (MIN) using the 

thermostat control.

 - Unplug the appliance from the mains.
 - Remove the water from the water tank.
 - Clean the appliance