Taurus Atlas 2400 - Инструкция по эксплуатации - Страница 7

tion.

 - The spray button has to be pressed repeatedly 

to release the first spray.

STEAM BLAST:

 - This function proportions extra steam for elimi-

nating wrinkles.

 -

Press the steam blast button (B). Wait a few 

seconds until vapour penetrates the fibres of the 

garment before pushing the button again. For 

optimum steam quality, do not apply more than 

three successive blasts.

 - The spray button has to be pressed repeatedly 

to release the first spray.

VERTICAL STEAMING

 - It is possible to iron hanging curtains, items of 

clothing on his hanger, etc. To do so, follow the 

instructions:

 - Select the maximum temperature of the iron, 

while turning the temperature regulator of the 

iron in a clockwise direction (Fig 2).

 -

Move the iron in a top to bottom direction while 

pressing the steam control ( B ). Important: for 

cotton and linen, its recommended to put the 

iron base in contact with the material. For other 

more delicated fibres, it’s recommended to keep 

the iron base at some centimetres of distance.

ONCE YOU HAVE FINISHED USING THE 

APPLIANCE:

 - Select the minimum position (MIN) using the 

thermostat control.

 - Unplug the appliance to the mains.
 -

Remove the water from the water tank.

 - Clean the appliance

CLEANING

 - Disconnect the appliance from the mains and let 

it cool before undertaking any cleaning task.

 -

Clean the equipment with a damp cloth with a 

few drops of washing-up liquid and then dry.

 -

Do not use solvents, or products with an acid or 

base pH such as bleach, or abrasive products, 

for cleaning the appliance.

 -

Do not submerge the appliance in water or any 

other liquid, or place it under a running tap.

SELF-CLEANING FUNCTION:

 - It is important to self-clean the appliance at least 

once a month to remove calcium and any other 

built-up minerals inside the iron.

 - Fill the depository to its maximum level, as 

indicated on “water fill” section.

 - Place the iron in a vertical position, plug in to 

the mains and select the maximum temperature.

 - Leave the appliance to heat up until the pilot 

light indicates that it has reached its consigned 

temperature.

 - Unplug the appliance and place in the sink.
 - Press the self-clean button (D), and keep it 

pressed down.

 -

Let the water flow out through the steam vents 

in the base, while lightly shaking the appliance.

 -

Release the button after a minute or when the 

tank becomes empty.

 - Leave the iron in the vertical position until it has 

cooled.

* HOW TO DEAL WITH LIME SCALE INCRUS-

TATIONS: 

-  For  the  appliance  to  work  correctly  it  should  be 

kept free of lime scale or magnesium incrusta-

tions caused by the use of hard water.

 - To prevent this kind of problem, we recommend 

the use of water with low lime or magnesium mi

-

neralisation. 

- Homemade solutions are not recommended for 

de-scaling this appliance, such as the use of vi-

negar.