Утюги Saturn ST-CC7145 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GENERAL INSTRUCTIONS
When using the steam brush for the first
time, you may notice a slight emission
of smoke and hear some sounds made
by the expanding plastics. This is quite
normal and it stops after a short time.
We also recommend passing the iron
over an ordinary cloth before using it for
the first time.
PREPARATIONS
Soft the laundry to be ironed according
to the international symbols on the
garment label, or if this is missing, ac-
cording to the type of fabric.
GARMENT
LABEL
FABRIC
TYPE
THERMO-
STAT REGU-
LATION
synthetic
·
low temper-
ature
silk -
wool
··
medium
temperature
Cotton -
linen
···
high tem-
perature
Fabric not to be ironed
Start ironing the garments requiring a
low temperature.
This reduces the waiting times (the
steam brush takes less time to heat up
than to cool down) and eliminates the
risk of scorching the fabric.
STEAM IRONING
Filling the reservoir
- Check that the plug is disconnected
from the socket.
- Raise the tip of the iron to help the
water enter the opening without over-
flowing.
- Slowly pour the water into the reser-
voir using the special measure cup and
taking care not to go over the maximum
level (about 150ml) indicated by “MAX”
on the reservoir.
Selecting the temperature.
- Put the steam brush in the base.
- Put the plug in the socket.
- Adjust the thermostat knob according
to the international symbol on the gar-
ment label. The plate temperature con-
trol light indicates that the iron is heat-
ing up. Wait until the plate temperature
control light goes off before ironing.
Warning:
during ironing, the plate
temperature control light comes on at
intervals, indicating that the selected
temperature is maintained. If you lower
the thermostat temperature after iron-
ing at a high temperature, do not start
ironing until the plate temperature con-
trol light comes on again.
Selecting Shot-steam and steam
when ironing vertically.
Press the shot-steam button to generate
a powerful burst of steam that can pen-
etrate the fabrics and smooth the most
difficult and tough creases. Wait for a
few seconds before pressing again.
