Утюги Saturn ST-CC7144 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
4
Insert the main plug into the wall
socket. The indicator light will turn on.
When the indicator light goes out you
may start ironing.
If you set the temperature control to
lower setting after ironing at a high
temperature. it is not recommended to
iron before the pilot light switches on
again.
Service life – 4 years. Before putting into
operation shelf life is unlimited.
DESCRIPTION
1.Temperature knob
2. Spray button
3. Burst of steam button
4. Steam control knob
5. Spray nozzle
6. Water inlet cover
7.Soleplate
8. Housing
9. Water tank
10.Self clean button
11. Cord protector
12.Pilot light
WATER TANK FILLING
Unplug the iron before filling the water
tank.
Hold the iron in horizontal position.
Slowly pour water through the water
inlet.
Do not fill higher than mark on the
water tank, in order to avoid spilling out
of water.
Note:
Your iron is designed to use tap
water. However, if the water is very
hard, it is advisable to use distilled
water.
The water tank should be emptied after
each use.
Note:
if you empty the water tank after
the iron has cooled down, set the iron
upright position on its heel rest, plug it
in and set the temperature control dial
to the maximum position, heat for 2
minutes. Unplug the iron from the
power supply.
SPRAYING
As long as there is enough water in the
water tank, you may use the spray
button at any temperature setting
during steam or dry ironing.
Press the spray button several times to
activate the pump while you are ironing.
