Irit IR-2305 - Инструкция по эксплуатации - Страница 2

Description

1.Steam burst button
2.Water fill cover
3.Handle foldable button
4.Indicator light
5.Thermostat control knob
6.Soleplate
7.Handle
8.Water tank
9.Voltage switcher

Important safeguards

Please read the owner's manual before using the product.
Before using, please check the voltage of the product if it is the same with the 
one in your home.
When using iron, you are recommended to use filtered water.
During the iron is electrified, operator must not leave, must not let children touch 
the iron.
When filling water or pouring out remaining water. Please pull out the plug first.
After using, turn the temperature regulating knob to “0”, pull out the plug, put the 
iron on the smooth and stable place vertically.
If the supply cord is damaged, it must be replaced by service center or qualified 
persons in order to avoid a hazard.
The iron is not to be used if there are visible signs of damage.
When placing the iron on its stand, ensure that the surface on which the stand is 
placed is stable.
After using, turn the thermostat knob to MIN, pull out the plug then pour out 
remaining water and put the iron vertically on a smooth and stable place.
This appliance is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety 
Always pour water from the water tank after using iron. 

Folding

Down

the

Handle

Press handle foldable 
button for folding handle                                       Press

IR-2305

IR-2305

3

2

How to iron with steam:

1.Fill water in the water tank.
2.Use steam ironing, turn the steam knob to the “1, 2, 3” position.
3.After indicator turn off, turn the steam knob to the “1, 2, 3” position, steam will 
spray, you can start to iron.
4.After ironing complete, turn the temperature regulating knob to the “MIN” 
position, pull out the plug, take off the water tank, pour out the remaining water.

Burst steaming

Set the temperature regulator to the MAX.
Press the Burst steam button at intervals of 5 seconds.

Warning:

 enhanced steam emission may only be used with steam ironing 

(steam knob should be set to a position other than "0").
This function can be used in an upright position of iron for vertical steaming.

Care and cleaning

For cleaning, use a soft cloth. Never use sandpaper, vinegar or other chemical 
solutions. To clean plastic surfaces using ordinary soap and water solution.

Storage

Pull the plug out of the socket. Remove water from the water tank.
Place the iron in a vertical position and allow it to cool completely.

The importer retains his right to make changes in appearance and 
completeness of the item without preliminary notification to the customer.
For household usage only. 

TECHNICAL PARAMETERS:

Voltage: 

11

0

-220

V/50

-60

H

z

Power

 800 W

Service life is 2 years.
Made in China.

1

2

3

4

5

6

7

8

9