Irit IR-2232 - Инструкция по эксплуатации

IR-2

23

2

Утюг электрический

Steam iron

Description

1.

Spraying button

2.

Burst steam button

3.

Steam regulating knob

4.

Cover of water filling mouth

5.

Spraying mouth

6. Ceramic

ing soleplate

 coat

7.

Water tank

8.

Indicator bulb                 

9.

Temperature regulating knob  

10. Cord
11. Self-Cleaning button

Important safeguards

Please read the owner's manual before using the product.
Before using, please check the voltage of the product if it is the same with 
the one in your home.
When using steam ironing, you are recommended to use boiled and filtered 
water.
During the iron is electrified, operator must not leave, must not let children 
touch the iron.
When filling water or pouring out remaining water. Please pull out the plug 
first.
After using, turn the temperature regulating knob to “0”, pull out the plug, put 
the iron on the smooth and stable place vertically.
If the supply cord is damaged, it must be replaced by service center or 
qualified persons in order to avoid a hazard.
The iron is not to be used if there are visible signs of damage.
When placing the iron on its stand, ensure that the surface on which the 
stand is placed is stable.
This appliance is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction 
concerning use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the 
appliance.

How to fill water

unplug the iron before filling with water.
pull up the cap of water filling mouth, fill until full. 
push the cap back to its original position.

How to dry ironing:

Turn the temperature regulating knob to “0” position, turn the steam knob to “0” 
position, put the plug into the socket.
Turn the temperature regulating knob to the temperature scale which the ironed 
clothes required, the indicator will light on, then put the iron on the smooth and 
stable place vertically.
After the indicator turn off, you can begin to iron.

How to iron with steam:

Fill water in the water tank.
Use steam ironing, turn the steam knob to the “1, 2, 3” position, the method for 
regulating temperature is the same with dry ironing.
After ironing complete, turn the temperature regulating knob to the “0” position, 
pull out the plug, take off the water tank, pour out the remaining water, turn the 
steam knob to the “MIN” position

How to spray:

Press the spraying button repeatedly, water will spray out from the spraying 
mouth, at the time, you should keep enough water in the water tank.

Burst steaming

Set the temperature regulator to the MAX.
Press the Burst steam button at intervals of 5 seconds

Warning:

 enhanced steam emission may only be used with steam ironing (steam 

knob should be set to a position other than "0")
This function can be used in an upright position of iron for vertical steaming

Self-Cleaning Function:

When after use around one month, you could heat the soleplate above 100

℃

, 

then put the steam button to Self-Cleaning place
The strong steam with some water will come out from soleplate, It will help clean 
the soleplate and prolong soleplate life

Care and cleaning

For cleaning, use a soft cloth. Never use sandpaper, vinegar or other chemical 
solutions. To clean plastic surfaces using ordinary soap and water solution

Storage

Pull the plug out of the socket. Remove water from the water tank
Place the iron in a vertical position and allow it to cool completely

The importer retains his right to make changes in appearance and 
completeness of the item without preliminary notification to the customer.
For household usage only.

The date of manufacture is marked on the packaging

TECHNICAL CHARACTERISTICS:

Voltage 220V/50Hz
Power 2000W

Service life 2 years
Made in China