Irit IR-2222 - Инструкция по эксплуатации - Страница 2

IR-

2

2

22

IR-

2

2

22

2

3

Description

1.Spraying mouth

2.

Cover of water filling mouth

3

.Burst steam button

4.Spraying button

5

.Steam regulating knob

6

 Soleplate

7.Self-clean
8.Water tank
9.Indicator bulb                 
10.Temperature regulating knob
11.

Мaximum water level

12.Cord

Important safeguards

Please read the owner's manual before using the product.
Before using, please check the voltage of the product if it is the same with the 
one in your home.
When using steam ironing, you are recommended to use distilled water.
During the iron is electrified, operator must not leave, must not let children touch 
the iron.
When filling water or pouring out remaining water. Please pull out the plug first.
After using, turn the temperature regulating knob to “0”, pull out the plug, put the 
iron on the smooth and stable place vertically.
If the supply cord is damaged, it must be replaced by service center or qualified 
persons in order to avoid a hazard.
The iron is not to be used if there are visible signs of damage.
When placing the iron on its stand, ensure that the surface on which the stand is 
placed is stable.
This appliance is not intended for use by persons (including children) with 
reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the appliance.

How to fill water

pull up the cap of water filling mouth
fill until full
push the cap back to its original position.

How to dry ironing:

Turn the temperature regulating knob to “0” position, turn the steam knob to “0” 
position, put the plug into the socket.

Turn the temperature regulating knob to the temperature scale which the ironed 
clothes required, the indicator will light on, then put the iron on the smooth and 
stable place vertically.
After the indicator turn off, you can begin to iron.

How to iron with steam:

Fill water in the water tank.
Use steam ironing, turn the steam knob to the “1, 2, 3” position, the method for 
regulating temperature is the same with dry ironing.
After indicator turn off, turn the steam knob to the “1, 2, 3” position, steam will 
spray, you can start to iron.
After ironing complete, turn the temperature regulating knob to the “0” position, 
pull out the plug, take off the water tank, pour out the remaining water, turn the 
steam knob to the “0” position

How to spray:

Press the spraying button repeatedly, water will spray out from the spraying 
mouth, at the time, you should keep enough water in the water tank.

Burst steaming

Set the temperature regulator to the MAX.
Press the Burst steam button at intervals of 5 seconds

Warning:

 enhanced steam emission may only be used with steam ironing 

(steam knob should be set to a position other than "0")
This function can be used in an upright position of iron for vertical steaming

Self-Cleaning Function:

When after use around one month, you could heat the soleplate above 100 , 
then put the steam button to Self-Cleaning place
The strong steam with some water will come out from soleplate, It will help clean 
the soleplate and prolong soleplate life

Care and cleaning

For cleaning, use a soft cloth. Never use sandpaper, vinegar or other chemical 
solutions. To clean plastic surfaces using ordinary soap and water solution

Storage

Pull the plug out of the socket. Remove water from the water tank
Place the iron in a vertical position and allow it to cool completely

The importer retains his right to make changes in appearance and completeness of the item 
without preliminary notification to the customer.
For household usage only.

TECHNICAL CHARACTERISTICS:

Voltage

 220-240 

V

/ 50

 Hz

Power 2

0

00W

Working life 

2

 years

1

2

3

4

5

6

7

8

9

10

11

12