Утюги Elenberg SI-3025 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

15
WARNING:
For delicate fabrics, we recommend moistening the fabric before-
hand using the spray function (4), or putting a damp cloth between
the iron and the fabric. To avoid staining, do not use the spray on
silk or synthetic fabrics.
CLEANING
Please note:
Before cleaning the iron in any way, make sure that the appliance
plug is not connected to the socket.
Any deposits, starch residue or size left on the plate can be re-
moved using a damp cloth or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped
over with a dry cloth.
SELF-CLEANING
The self-cleaning feature cleans inside the plate, removing impurities.
We recommend using it every 10-15days. Directions:
• Fill the reservoir up to the maximum level indicated and set the
steam selector (3) to “0”
• Set the thermostat knob (11) to the maximum temperature and
wait for the light (6) to turn off.
• Pull the plug out of the socket and hold the iron horizontally over
the sink.
• Hold the cleanout button (12) setting until all the boiling water,
steam, impurities come out [Fig. 7].
• When the soleplate has cooled down, you can clean it with a damp
cloth.
HOW TO PUT IT AWAY
• Disconnect the plug of the iron from the socket.
• Empty the reservoir by turning the iron upside down and gently
shaking it.
• Leave the iron to cool down completely.
• Roll up the power cord with the rewinder [Fig. 8].
• Always put the iron away in a vertical position.
ADVICE FOR GOOD IRONING
• We recommend using the lowest temperatures with fabrics that
have unusual finishes (sequins, embroidery, flush, etc.).
• If the fabric is mixed (e.g. 40% cotton 60% synthetics), set the
thermostat to the temperature of the fiber requiring the lower
temperature.
• If you don’t know the composition of the fabric, determine the
