Electrolux EDBS3360 - Инструкция по эксплуатации - Страница 9

9

www.electrolux.com

DE
DK
EE

FI

FR

HR
HU
IT
LT
LV

FA

NO
PL

RO
RU
SE
SI
SK
SR
TR

CZ

AR

GB

BG

UA

FABRIC

TEMPERATURE SETTING

IRONING RECOMMENDATION

Denim

      to “MAX”

Use maximum steam.

Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the 

table!

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

Soleplate is not heating even 

though iron is turned on.

Connection problem

Check main power supply cable, plug and 

outlet.

Temperature control is in MIN 

position.

Select adequate temperature.

Iron does not produce steam.

Not enough water in tank.

Fill water tank (see “Getting started”, no 2).

Steam control is selected in non-

steam position.

Set steam control between positions of 

minimum steam and maximum steam (see 

“Ironing chart”).

Selected temperature is lower than 

that specified to use with steam.

Increase temperature to at least 

  .

Steam jet and vertical steam 

jet function does not work.

Steam jet function was used very 

frequently within a short period.

Put iron on horizontal position and wait 

before using steam jet function.

Iron is not hot enough.

Adjust the proper temperature to steam 

ironing (up to    ). Put iron in vertical 

position and wait until temperature 

indicator light turns off.

Water leaks from the soleplate 

during ironing.

The iron is not hot enough.

Set the temperature dial to a temperature  

(    to maximum) suitable for steam 

ironing. Put the iron on its heel and wait 

until the light has gone out before you start 

ironing.

Flakes and impurities come 

out of the soleplate during 

ironing.

You have used hard water, which has 

caused scale flakes to develop in the 

water tank.

Press and hold the steam button for about 

one minute to get steam. Then hold one 

more minute in order to clean the steam 

generating system. Iron an old towel, to 

ensure that any residues inside the iron are 

not transferred to the laundry.

Water leaks from the soleplate 

while the iron is cooling down 

or after it has been stored.

The iron has been put in horizontal 

position while there is still water in 

the water tank.

Empty the water tank and set the steam 

control to position off before storing the 

iron.

Brown streaks come out of the 

soleplate while ironing and 

stain the linen.

You have used chemical descaling 

agents.

Do not use any descaling agents.

Fabric fibres have accumulated in 

the holes of the soleplate and are 

burning.

Clean the soleplate with a damp soft cloth.

Fabrics might not be properly rinsed 

or the garments are new and have 

not been washed before ironing.

Please rinse the laundry properly again.

DISPOSAL

This symbol on the product indicates that this product contains a battery which shall not be disposed with 
normal household waste.

This symbol on the product or on its packaging indicates that the product may not be treated as household 
waste. To recycle your product, please take it to an official collection point or to an Electrolux service center 
that can remove and recycle the battery and electric parts in a safe and professional way. Follow your 
country’s rules for the separate collection of electrical products and rechargeable batteries. 

Electrolux reserves the right to change products, information and specifications without notice.