Electrolux E8ST1-8EGM - Инструкция по эксплуатации - Страница 9

9

www.electrolux.com

DE
DK
EE

FI

FR

HR
HU
IT
LT
LV

FA

NO
PL

RO
RU
SE
SI
SK
SR
TR

CZ

AR

GB

BG

UA

ES

FABRIC

TEMPERATURE SETTING

IRONING RECOMMENDATION

Cotton blends

Outdoor

Check the label and follow the manufacturer’s 

instructions. Outdoor setting is recommended for this 

kind of fiber.

Water-repellent 

breathable fabrics  

(excluding PVC-coatings)

Outdoor

Gently wash and air dry your outdoor garments 

according their care label instructions. Carefully and 

slowly dry iron the outside to reach all parts of your 

garment in order to reactivate the DWR (Durable Water 

Repellency) treatment and restore the water repellency 

of your outdoor garments, which is better than air 

drying only.

Wool & Wool blends

 Wool

Steam iron inside out or use ironing cloth.

Cotton

 Cotton

Dry iron while still damp or use spray to dampen. Use 

maximum steam.

Corduroy

 Cotton

Steam iron inside out or use ironing cloth.

Linen

 Cotton or 

 Linen

Iron inside out or use ironing cloth to prevent shiny iron 

marks, especially with dark-colored fabrics. Dry iron 

while still damp or use spray to dampen. Use maximum 

steam.

Denim

 Cotton or 

 Linen

Use maximum steam. Apply maximum steam by 

pressing and holding the steam boost button.

Please follow the instructions of your garment care label.

Varied ironing speed and fabric dampness might cause optimal setting to differ from the recommendations in the 

table!

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

Soleplate is not heating even 

though iron is turned on.

Connection problem

Check main power supply cable, plug and 

outlet.

Temperature control is in “Outdoor” 

position.

Select higher programme like “    Cotton”.

Iron does not produce steam.

Not enough water in tank.

Fill water tank (see “Getting started”, no 2).

Selected temperature is lower than 

that specified to use with steam.

Increase temperature to at least 

“

Cotton

”.

Steam boost and vertical 

steam boost function does 

not work.

Steam boost function was used very 

frequently within a short period.

Put iron on horizontal position and wait 

before using steam boost function.

Iron is not hot enough.

Adjust the proper temperature to steam 

ironing (up to 

“

   Cotton

”

). Put iron in 

vertical position and wait until temperature 

indicator light turns off.

Water leaks from the soleplate 

during ironing.

The iron is not hot enough.

Set the temperature dial to a temperature  

(

“

   Cotton

” 

to maximum) suitable for 

steam ironing. Put the iron on its heel and 

wait until the headlight is on before you 

start ironing.

Flakes and impurities come 

out of the soleplate during 

ironing.

You have used hard water, which has 

caused scale flakes to develop in the 

water tank. Clean the station with 

descaler (see “Cleaning“, no 14).

Press and hold the steam button for about 

one minute to get steam. Then hold one 

more minute in order to clean the steam 

generating system. Before starting ironing, 

please test your iron on an old towel to 

ensure that no residues inside the iron are 

transferred to your garments. 

Water leaks from the soleplate 

while the iron is cooling down 

or after it has been stored.

The iron has been put in horizontal 

position while there is still water in 

the water tank.

Empty the water tank and switch off the 

steam station by pressing ON/OFF button 

(M) on the boiler unit before storing the 

iron.

Lavignia_Renew_800_SteamStation_Elux_180918.indd   9

2018-09-18   13:08:31