Electrolux E8SI1-7EGM - Инструкция по эксплуатации - Страница 9

9

www.electrolux.com

DE
DK
EE

FI

FR

HR
HU
IT
LT
LV

FA

NO
PL

RO
RU
SE
SI
SK
SR
TR

CZ

AR

GB

BG

UA

ES

IRONING CHART

FABRIC

TEMPERATURE SETTING

IRONING RECOMMENDATION

Acrylic

Outdoor

Dry iron inside out.

Acetate

Outdoor

Dry iron inside out while still damp or use spray to 

dampen.

Nylon & Polyester

Outdoor

Iron inside out while still damp or use spray to dampen.

Rayon

Outdoor

Iron inside out.

Viscose

Outdoor

Iron inside out.

Silk

Outdoor

Iron inside out. Use an ironing cloth to prevent shiny 

iron marks.

Cotton blends

Outdoor

Check the label and follow the manufacturer’s 

instructions. Outdoor setting is recommended for this 

kind of fiber.

Water-repellent 

breathable fabrics  

(excluding PVC-coatings)

Outdoor

Gently wash and air-dry your outdoor garments 

according to their care label instructions. Carefully and 

slowly dry iron the outside to reach all parts of your 

garment in order to reactivate the DWR (Durable Water 

Repellency) treatment and restore the water repellency 

of your garment*. You can use this setting after washing 

and air-drying your outdoor garment or anytime you 

want to restore the water repellency of certain areas of 

your garment.

* Better than air drying only for water - repellent 

outdoor garments 

Wool & Wool blends

 Wool

Steam iron inside out or use ironing cloth.

Cotton

   Cotton

Dry iron while still damp or use spray to dampen. Use 

maximum steam.

Corduroy

   Cotton

Steam iron inside out or use ironing cloth.

Linen

   Cotton or       Linen

Iron inside out or use ironing cloth to prevent shiny iron 

marks, especially with dark-colored fabrics. Dry iron 

while still damp or use spray to dampen. Use maximum 

steam.

Denim

   Cotton or       Linen

Use maximum steam. Apply maximum steam by 

pressing and holding the steam on/off button.

Please follow the instructions of your garment care label.

Varied ironing speed and fabric dampness might cause optimal setting to differ from the recommendations in the 

table!

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

Soleplate is not heating even 

though iron is turned on.

Connection problem

Check main power supply cable, plug and 

outlet.

Temperature control is in “Outdoor” 

position.

Select higher programme like “    Cotton”.

Iron does not produce steam.

Not enough water in tank.

Fill water tank (see “Getting started”, no 2).

Selected temperature is lower than 

that specified to use with steam.

Increase temperature to at least 

“

Cotton

”.

Steam jet and vertical steam 

jet function does not work.

Steam jet function was used very 

frequently within a short period.

Put iron on horizontal position and wait 

before using steam jet function.

Iron is not hot enough.

Adjust the proper temperature to steam 

ironing (up to 

“

   Cotton

”

). Put iron in 

vertical position and wait until temperature 

indicator light turns off.