BRAYER BR4001 - Инструкция по эксплуатации - Страница 4

6

7

EN

EN

THE UNIT IS INTENDED FOR HOUSEHOLD USE 

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL 

OR LABORATORY PURPOSES.

BEFORE THE FIRST USE
After the unit’s transportation or storage at negative 

temperature, unpack it and wait for at least 3 hours 

before using.

• 

Unpack the iron and remove any packaging materials 

and advertising stickers. 

• 

If there is a protective film on the soleplate (11), 

remove it.

• 

There may be water residue in the tank (10), as the 

iron has undergone factory quality control.

• 

Keep the original package.

• 

Read the safety measures and operating 

recommendations.

• 

Check the delivery set.

• 

Examine the unit for damages, in case of damage do 

not plug it into the mains.

• 

Make sure that specified specifications of power 

supply voltage of the unit correspond to the 

specifications of your mains. When using the unit in 

the mains with 60 Hz frequency, the unit does not 

need any additional settings.

• 

Clean the iron body and the soleplate with a soft, 

slightly damp cloth and then wipe it dry.

WATER SELECTION

• 

Use tap water to fill the water tank (10) of the iron.

• 

Anti-calc function softens water in order to decrease 

the mineral deposit in the steam chamber, but we 

recommend to fill the tank with water additionaly 

cleaned with domestic filters. 

• 

If tap water is hard, it is recommended to mix it with 

distilled water in proportion 1:1. If tap water is too 

hard, mix it with distilled water in proportion 1:2 or 

use distilled water only.

FILLING THE WATER TANK
ATTENTION!

Before filling the water tank (10) with water make sure 

that the iron is switched off and unplugged.

• 

Set the temperature control knob (12) to the position 

«OFF», and the continuous steam supply knob (3) to 
the position «   ». 

• 

Open the water inlet lid (2).

• 

Pour the water into the water tank using the beaker 

(14) and then close the lid (2).

Notes:

– do not let water go over the «МАХ» mark when filling 

the water tank (10);
– if you need to refill the water tank during ironing, 

switch the iron off and remove the power plug from the 

mains socket.

IRONING TEMPERATURE

The distinct feature of this model is that it is not 

equipped with a temperature control knob. The iron 

automatically selects the optimal combination of 

temperature and amount of steam for any type of fabrics 

suitable for ironing.

Before using the iron for the first time test the heated 

iron on a piece of cloth to be sure that the iron soleplate 

(11) and the water tank (10) are clean.

• 

If the item label is marked with the symbol «

» , 

do not iron the item.

• 

Sort items by ironing temperature first: synthetics 

with synthetics, wool with wool, cotton with cotton.

• 

The soleplate (11) heats up faster than it cools down, 

that’s why you should start ironing with synthetics, 

then increase the temperature and iron silk and wool 

items. Cotton and linen items should be ironed last.

• 

Corduroy and other fabrics that can become glossy 

should be ironed backside.

DRY IRONING

• 

Place the iron on the base (9) on a flat and steady 

surface.

• 

Insert the power plug into the mains socket, the 

indicator (6) will light up.

• 

Set the steam supply knob (3) to the position «   » 

(the steam supply is off).

• 

When the iron soleplate (11) reaches the set 

temperature, the indicator (6) will go out and you can 

start ironing.

• 

After you finish ironing, disconnect the power 

plug from the mains socket and wait until the iron 

soleplate (11) cools down completely.

Note:

- when switching the unit on for the first time, foreign 

smell can appear. It is normal;
- if you are going to iron delicate fabrics after the 

soleplate (11) heats up, it is recommended to wait for 

the next cycle of the indicator (6) switching off.

STEAM IRONING

The iron is equipped with anti-drip valve that stops 

water supply, if the soleplate (11) temperature is too low, 

it prevents dripping from the soleplate (11) openings. 

• 

Place the iron on its base (9).

• 

Insert the power plug into the mains socket, the 

indicator (6) will light up.

• 

Insert the power plug into the mains socket.

• 

Make sure that there is enough water in the water 

tank (10).

• 

When the temperature of the soleplate (11) reaches 

the set point, the indicator (6) will go out and you can 

start ironing.

• 

Set the necessary steam intensity with the 

continuous steam supply knob (3): steam will be