Atlanta ATH-401 - Инструкция по эксплуатации - Страница 5

5

INSTRUCTION MANUAL

4.  As  soon  as  the  heat  indicator  (I)  goes  off,  the  iron  is  heated  to  the  required 
temperature and you can start ironing. 
5.  Do  not  let  the  soleplate  come  in  contact  with  hard  objects  (buttons,  fasteners 
and so on). 
6.  After you have finished ironing, unplug the iron and place it in the vertical position 
to cool down.
 
NOTES

•  Do not heat the iron on a gas or electric cooker. 
•  When first in use you may notice a characteristic odour of burnt tool lubricant.  
•  If you’ve been ironing with the heat regulator (D) set for ‘   ’, and then decided 
to  set  it  for  ‘   ’  or  ‘ ’,  the  iron  temperature  will  go  down  to  the  adequate  level 
after  some  time,  but  not  at  once!  If  you  want  to  make  sure  the  iron  temperature 
corresponds to the selected level, unplug the iron and let it cool down, then plug it 
again. 
•  The manufacturer has the right to make alterations in the iron design to improve 
the consumer properties of the unit.

SAFETY MEASURES 

•  The iron is adjusted to function with the power supply specified on the label. 
•  Never operate the iron on uneven surface that is not heat-resistant.  
•  This  appliance  is  not  intended  for  use  by  children  or  persons  with  reduced 
physical,  sensory  or  mental  capabilities,  or  wanting  in  knowledge  or  experience, 
unless they are given supervision by a person responsible for their safety. 
•  If the power supply cord is damaged, it should be replaced by the manufacturer 
or its agent, or the responsible qualified person.
•  Close  supervision  is  necessary  when  the  appliance  is  used  around  children. 
Never  leave  the  appliance  unattended  when  in  use.  Do  not  let  the  power  supply 
cord hang from the table, because children can bring the iron down by it and suffer 
serious burns. 
•  Be  careful:  do  not  touch  the  iron  soleplate  when  in  use.  Do  not  operate  the 
appliance close to objects that can be easily deformed by high temperature.
•  Put the iron in a vertical position only. 
•  In order to reduce the risk of fire and electric shock: 
- do not use this appliance in damp rooms;
- do not plug the appliance if there is water on its surface;
- do not plug or unplug the appliance with wet hands;
- do not allow the plug to overheat; make sure the appliance is properly plugged;
- do not use the iron if the supply cord is damaged or wet;