Утюги Rowenta DX1300F1 EFFECTIVE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
22
FR
NL
DE
EN
IT
ES
PT
EL
TR
DA
SV
NO
FI
HR
SR
BG
SL
PL
CS
SK
HU
RU
UK
RO
ET
LV
LT
AR
If there is a problem?
Environnement
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Water drips from
the holes in the
soleplate.
You are using steam while
the iron is not hot enough.
Wait until the thermostat light
goes out.
You are using the shot of
steam button too often.
Wait a few seconds between
each use of the button.
You have stored the iron
horizontally, without
emptying it and without
setting it to .
See the section "Storing your
iron".
Brown streaks
come through
the holes in the
soleplate and
stain the linen.
You are using chemical
descaling agents.
Do not add any descaling
agents to the water in the
water tank.
You are not using the right
type of water.
Perform a self-cleaning
operation and consult the
chapter "What water should I
use?".
Your linen has not been
rinsed sufficiently or you
have ironed a new garment
before washing it.
Make sure that your laundry is
rinsed sufficiently in order to
remove any deposits of soap or
chemical products on new
clothes.
The soleplate is
dirty or brown
and can stain the
linen.
Your are ironing with an
inappropriate temperature
selection (temperature too
high).
Clean the soleplate as
indicated above. Select the
appropriate program.
You are using starch.
Clean the soleplate as
indicated above. Always spray
starch onto the reverse side of
the fabric to be ironed.
There is little or
no steam.
The water tank is empty.
Fill the water tank.
Your iron has been used
dry for too long.
Carry out a self-clean.
The soleplate is
scratched or
damaged.
You have placed your iron
flat on a metallic rest-plate
or ironed over a zip.
Always set your iron on its
heel.
Do not iron over zips.
Steam or water
come from the
iron as you finish
filling the tank.
The steam control is not set
to the
position.
Check that the steam control is
set to the
position.
The water tank is overfilled. Never exceed the Max level.
The spray does
not spray.
The water tank is not filled
enough.
Fill up the water tank.
1103908051-index 01 DX1000 D1_110 x 220 22/06/12 09:57 Page22
