Philips GC9675/80 - Инструкция по эксплуатации - Страница 9

11

ENGLISH

Problem

Possible cause

Solution

Dirty water 
and impurities 
come out of the 
soleplate or the 
soleplate is dirty.

Impurities or chemicals 
present in the water have 
deposited in the steam 
vents and/or on the 
soleplate.

Clean the soleplate with a damp 
cloth.

Too much scale and 
minerals have accumulated 
inside the appliance.

Descale the appliance regularly (see 
chapter ‘Important - DESCALING’).

The iron leaves 
a shine or an 
imprint on the 
garment.

The surface to be ironed 
was uneven, for instance 
because you were ironing 
over a seam or a fold in the 
garment.

PerfectCare is safe on all garments. 
The shine or imprint is not 
permanent and will come off if you 
wash the garment. Avoid ironing 
over seams or folds or you can place 
a cotton cloth over the area to be 
ironed to avoid imprints at seams 
and folds.

The appliance 
does not produce 
any steam.

There is not enough water 
in the water tank (the ‘water 
tank empty’ light flashes).

Fill the water tank (see chapter ‘Using 
your appliance’, section ‘Filling the 
water tank’).

The appliance is not hot 
enough to produce steam.

Wait until the ‘iron ready’ light on the 
iron lights up continuously.

You did not press the steam 
trigger.

Press the steam trigger and keep it 
pressed while you iron.

The water tank is not placed 
in the appliance properly.

Slide the water tank back into the 
appliance firmly (‘click’).

The appliance is not 
switched on.

Insert the plug in the wall socket and 
press the on/off button to switch on 
the appliance.

The appliance 
has switched off. 
The light in the 
on/off button 
flashes.

The auto-off function is 
activated automatically 
when the appliance has not 
been used for more than 10 
minutes.

Press the power on/off button to 
switch on the appliance again.

The appliance 
produces a 
pumping sound.

Water is pumped into the 
boiler inside the appliance. 
This is normal.

If the pumping sound continues 
nonstop, switch off the appliance 
and remove the plug from the wall 
socket. Contact an authorised Philips 
service centre.