Philips GC9621 - Инструкция по эксплуатации - Страница 5

Vertical ironing 

Hot steam is emitted from the iron. Never attempt to remove creases from a garment 

that someone is wearing. Do not apply steam near your or someone else’s hand.

You can use the iron in ver tical position to remove wrinkles from hanging fabrics. 

 1 

 Hold the iron in vertical position, press the steam trigger and touch the garment slightly with 

the soleplate (Fig. 7).

Energy saving 

ECO mode

 - By using the ECO mode (reduced amount of steam), you can save energy without 

compromising on the ironing result. The green light is on (Fig. 8).

 - You can deactivate the ECO mode by pressing the ECO button. The green light goes off.

Safety auto-off mode

 - To save energy, the appliance switches off automatically when it has not been used for  

10 minutes. The auto-off light in the on/off button star ts to flash (Fig. 9).

 - To activate the appliance again, press the on/off button. The appliance then star ts to heat up again.

Note: The appliance is not switched off completely when it is in safety auto-off mode. To switch off the 

appliance, press the on/off button.

Turbo steam

For faster ironing and a higher amount of steam, you can use Turbo steam.

 1 

 Press and hold the on/off button for 2 seconds until the light turns white.  (Fig. 10)

 2 

 To deactivate Turbo steam, press and hold the on/off button again for 2 seconds until the 

white light turns blue 

Ironing tips

Minimising wrinkles while drying

Star t wrinkle removal early in the dr ying process by spreading out your laundr y properly after 

washing and by putting garments on hangers to make them dr y naturally with fewer wrinkles.  

Best practice shirt ironing

Start with the time-consuming parts like collar, cuff links and sleeves. Next, iron the bigger parts like front 

and back to prevent wrinkling the bigger parts when you are busy ironing the time-consuming parts.

Collar:

 When you iron a collar, star t on its underside and work from the outside (the pointy end) 

inwards. Turn over and repeat. Fold down the collar and press the edge for a more crisp finish. 

Buttons: 

Iron on the reverse side of the buttons for more effective and faster ironing. 

IMPORTANT - DESCALING

It is very important to perform the descaling procedure as soon as the EASY  

DE-CALC light starts to flash and the appliance beeps continuously.

The EASY DE-CALC light flashes and the appliance beeps continuously after about a month or  

10 ironing sessions to indicate that the appliance needs to be descaled. 

Perform the following 

descaling procedure before you continue ironing.
To avoid the risk of burns, unplug the appliance and let it cool down for at least  

two hours before you perform the descaling procedure.

ENGLISH

7