Philips GC9415 - Инструкция по эксплуатации - Страница 7

9

1 

Make sure the appliance is cool and clean the soleplate with a damp cloth.

2 

Empty the water tank through the filling door (Fig. 20). Tilt the appliance and remove the EASY DE-
CALC knob.

3 

Pour 500ml distilled water into the DE-CALC opening and tighten the EASY DE-CALC knob (Fig. 21).

4 

Fill up the water tank halfway. Switch on the appliance and wait for 5 minutes. 

5 

Keep the steam trigger pressed continuously while you iron a few pieces of thick cloth in a back-
and-forth motion for 3 minutes (Fig. 22).

Warning: Hot, dirty water (about 100-150 ml) comes out of the soleplate.

6 

Stop cleaning when no more water comes out of the soleplate or when steam starts coming out of 
the soleplate.

7 

Unplug the steam generator and let it cool down for at least two hours. Remove the EASY DE-CALC 
knob and let the remaining water flow out. Tighten the EASY DE-CALC knob.

Storage

1 

Switch off the appliance and unplug it.

2 

Pour the water out of the water tank through the filling door (Fig. 20).

3 

Fold the supply hose.

4 

Wind the supply hose inside the supply hose storage compartment (Fig. 23).

5 

Fold the mains cord and fasten it with the Velcro strip.

6 

Place the iron on the iron platform and lock it by pushing the carry lock release button (Fig. 24).

7 

You can carry the appliance with one hand by the handle of the iron when the iron is locked on the 
iron platform (Fig. 25).

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you 
are unable to solve the problem with the information below, visit

 www.philips.com/support 

for a list 

of frequently asked questions or contact the Consumer Care Center in your country.

Problem 

Cause 

Solution

Dirty water, brown stains 
or white flakes come out 
of the soleplate.

Scale has built up inside the 
appliance because it has not been 
descaled regularly.

Descale the appliance and the 
soleplate (see chapter 'Cleaning 
and maintenance').

You have put chemicals or additives 
in the water tank. 

Never use chemical or additives 
with the appliance. If you have 
already done so, follow the 
procedure in chapter 'Cleaning 
and maintenance' to remove the 
chemicals.

There is no or little steam. The appliance has not heated up 

sufficiently.

Wait until the iron ready light 
stays on continuously. This takes 
approx. 2 minutes. 

There is not enough water in the 
water tank.

Fill the water tank up to the MAX 
indication.

Scale has built up inside the 
appliance because it has not been 
descaled regularly.

Descale the appliance and 
soleplate (see chapter 'Cleaning 
and maintenance').

English