Philips GC5057/02 - Инструкция по эксплуатации - Страница 18

Problem

Possible cause

Solution

The iron leaves a shine 

or an imprint on the 

garment.

The surface to be ironed was 

uneven, for instance because you 

ironed over a seam or a fold in the 

garment.

The iron is safe to use on all garments. 

The shine or imprint is not permanent 

and disappears when you wash the 

garment. Avoid ironing over seams or 

folds. You can also place a cotton cloth 

over the area to be ironed to avoid 

imprints.

The iron produces a 

pumping sound.

Water is being pumped into the 

steam chamber. This is normal.

If the pumping sound continues nonstop, 

unplug the iron and contact the 

Consumer Care Centre.

The iron produces a 

loud pumping noise.

There is no water in the water tank. Fill the water tank (see chapter ‘Using 

the appliance’, section ‘Filling the water 

tank’).

The iron steams 

continuously when 

placed horizontally on 

the ironing board for 

20-30 seconds.

The ironing board did not provide a 

good flat suppor t and this activated 

the Auto Steam Sensor in the iron.

Place the iron on its heel when you are 

not ironing to prevent this problem.

Overview of models

Feature

GC5060

GC5057

GC5055

GC5050

OptimalTemp technology

3

3

3

3

Compact, powerful steam 

generation technology

3

3

3

3

Blue Smar t light

3

3

3

3

Constant steam output

65g/min

65g/min

65g/min

50g/min

Auto Steam Sensor

3

3

3

3

Soleplate

SteamGlide

SteamGlide

SteamGlide

anodilium

ECO button

3

-

-

-

Steam Boost

3

3

3

-

Constant ver tical steam

3

3

3

3

Soft-grip handle

3

3

3

3

Water tank capacity (ml)

320

320

320

320

Anti-drip system

3

3

3

3

Safety Auto-off mode

3

3

3

3

360° swivel cord

3

3

3

3

Cord length (m)

2.5

2.5

2.5

2.5

ENGLISH

18