Philips GC4885/30 Azur Pro - Инструкция по эксплуатации - Страница 9

Storage

 1 

 Unplug the iron and empty the water tank. Let it cool 

down in a safe place.

 2 

 Wind the mains cord around the backplate of the iron and 

store it on its heel.

Troubleshooting

This chapter summarises the most common problems you 
could encounter with the appliance. If you are unable to solve 
the problem with the information below, visit 

www.philips.com/

support

 for a list of frequently asked questions or contact the 

Consumer Care Centre in your country (see the worldwide 
guarantee lealet for contact details).

Problem

Possible cause

Solution

The steam boost 
function does 
not work properly 
(water leaks out of 
the soleplate).

You have used 
the steam boost 
function too often 
within a very short 
period.

Wait for a few seconds before you use the 
steam boost function again.

You have used 
the steam boost 
function at a too low 
temperature.

Set an ironing temperature at which the 
steam boost function can be used (

to 

MAX

).

Flakes and 
impurities 
come out of the 
soleplate during 
ironing.

Scales are formed 
inside the soleplate.

Use the Calc-clean function (see chapter 
‘Cleaning and maintenance’, section ‘Calc-
clean function’).

Water leaks from 
the water filling 
door.

You have overfilled 
the water tank.

Do not fill the water tank beyond the 

MAX

indication. Pour excess water out of the 
water tank.

Water or steam 
leaks from the 
back part of the 
iron.

You have not 
locked the Quick 
Calc release tray 
properly.

Take out the Quick Calc Release tray and 
clean it using tap water. Use a piece of 
cloth to wipe of  scales in the opening of 
the back part of the iron. Put back the tray 
and lock it. (See chapter ‘Cleaning and 
maintenance’, section ‘Quick calc release 
function’).

The Quick Calc 
release tray is 
damaged.

Contact a consumer care center in your 
country (see the world wide guarantee 
lealet for contact details).

ENGLISH

11