Philips GC4882/80 - Инструкция по эксплуатации - Страница 8

 5 

 Hold the iron over the sink. 

Keep pushing

 the calc clean 

button and gently shake the iron 

forth and back 

until all 

water in the water tank has been used up. 

Scales is flushed out, steam and boiling water also come out 

of the soleplate.

Note: Repeat steps 2 to 5 if the water that comes out of the 

iron still contains scale particles. 

 6 

 Plug in the iron and let the iron heat up to dry the soleplate. 

  7 

 Unplug the iron when the temperature indicator light goes out. 

 8 

 Move the iron gently over a piece of cloth to remove any 

water stains on the soleplate. 

Storage

 1 

 Unplug the iron and empty the water tank. Let it cool 

down in a safe place.

 2 

 Wind the mains cord around the backplate of the iron and 

store it on its heel.

Troubleshooting

This chapter summarises the most common problems you 
could encounter with the appliance. If you are unable to solve 
the problem with the information below, visit 

www.philips.com/

support

 for a list of frequently asked questions or contact the 

Consumer Care Centre in your country (see the worldwide 
guarantee leaflet for contact details).

Problem

Possible cause

Solution

Water leaks from 
the water filling 
door.

You have overfilled 
the water tank.

Do not fill the water tank beyond the 

MAX

indication. Pour excess water out of the 
water tank.

Water drips from 
the soleplate after 
the iron has been 
unplugged or has 
been stored.

The steam slider is 
set to 

MAX

 or 

ECO

.

Set the steam slider to dry setting.

You have put the 
iron in horizontal 
position with water 
still left in the 
water tank.

Empty the water tank.

ENGLISH

10