Philips GC4521/35 - Инструкция по эксплуатации - Страница 7

ENGLISH

9

Troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If you are 

unable to solve the problem with the information below, visit 

www.philips.com/support

 for a list of 

frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide 

guarantee leaflet for contact details).

Problem

Possible cause

Solution

Water leaks from the 

water filling door.

You have overfilled the 

water tank.

Do not fill the water tank beyond the 

MAX

indication. Pour excess water out of the water tank.

Water drips from 

the soleplate after 

the iron has been 

unplugged or has 

been stored.

The steam slider is set to 

MAX

 or 

ECO

.

Set the steam slider to dr y setting.

You have put the iron 

in horizontal position 

with water still left in the 

water tank.

Empty the water tank.

Water or steam leaks 

from the back par t of 

the iron.

You have not locked the 

Quick Calc release tray 

properly.

Take out the Quick Calc Release tray and clean it 

using tap water. Use a piece of cloth to wipe off  

calc in the opening of the back part of the iron. Put 

back the tray and lock it. (See chapter  ‘Cleaning 

and maintenance’, section  ‘Quick calc release 

function’).

The Quick Calc release 

tray is damaged.

Contact a consumer care center in your countr y 

(see the world wide guarantee leaflet for contact 

details).

The steam boost 

function does not 

work properly (water 

leaks out of the 

soleplate).

You have used the steam 

boost function too often 

within a ver y shor t period.

Wait for a few seconds before you use the steam 

boost function again.

You have used  the steam 

boost function at too low 

a temperature.

Set an ironing temperature at which the steam 

boost function can be used (

●●● 

to 

MAX

).

Flakes and impurities 

come out of the 

soleplate during 

ironing.

Calc are formed inside the 

soleplate.

Use the Calc-Clean function (see chapter ‘Cleaning 

and maintenance’, section ‘Calc-Clean function’).

9