Philips GC4412 - Инструкция по эксплуатации - Страница 9

Check the laundr y care label for the required ironing temperature:

 -

1

 for synthetic fabrics (e.g. acr ylic, nylon, polyamide, polyester) 

 -

1

 for silk 

 -

2

 for wool 

 -

3

 for cotton 

 -

MAX for linen

If you do not know what kind or kinds of fabric an ar ticle is made of, 

determine the right ironing temperature by ironing a par t that will not be 

visible when you wear or use the ar ticle.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to 

prevent shiny patches. To prevent stains, do not use the spray function.

Star t ironing the ar ticles that require the lowest ironing temperature, 

such as those made of synthetic fibres.

  4 

 Put the mains plug in an earthed wall socket.

,

The amber temperature light goes on.

  5 

 When the amber temperature light has gone out, wait a while 

before you start ironing.

The temperature light goes on from time to time during ironing.

using the appliance 

Note: The iron may give off some smoke when you use it for the first time. 

This stops after a short while.

steam ironing

  1 

 Make sure that there is enough water in the water tank.

  2 

 Set the required ironing temperature (see chapter ‘Preparing for 

use’, section ‘Setting the temperature).

  3 

 Set the appropriate steam setting. Make sure that the steam setting 

you select is suitable for the set ironing temperature: (Fig. 7)

 - 1 - 3 for moderate steam (temperature settings 

2

 to 

3

) 

 - 4 - 6 for strong steam (temperature settings 

3

 to MAX) 

Note: The iron starts to produce steam as soon as it reaches the set 

temperature.

EnGlish

9

4239.000.6443.6.indd   9

21-10-09   14:11