Philips GC4220/02 Azur - Инструкция по эксплуатации - Страница 4

Important

Read these instructions for use carefully before using the appliance and
save them for future reference.
- Never leave the iron unattended when it is connected to the mains.
- This appliance is not intended for use by children.
- Infirm persons should not be allowed to use the appliance without

super vision. Keep an eye on children to make sure that they do not
play with the appliance.

- The soleplate of the iron can become extremely hot and may cause

burns if touched.

- Never use the appliance if it is damaged in any way.
- When you have finished ironing, when you clean the appliance, when

you fill or empty the water tank and also when you leave the iron
even for a shor t while: set the steam control to position O, put the
iron on its heel and remove the plug from the wall socket.

- If the mains cord of this appliance is damaged, it may only be

replaced by a ser vice centre authorised by Philips in order to avoid
hazardous situations.

Before first use

1

Check if the voltage indicated on the appliance corresponds to

the local mains voltage before you connect the appliance.

C

2

Remove the protective heat cover from the soleplate (type

GC4243 only). Remove any sticker or protective foil from the
soleplate.

3

Let the iron heat up to maximum temperature and pass the

iron over a piece of damp cloth for several minutes to remove
any residues from the soleplate.

B

The iron may give off some smoke when you use it for the first time. This
will cease after a short while.

Preparing for use

Filling the water tank

Never immerse the iron in water.

1

Remove the mains plug from the wall socket.

C

2

Set the steam control to position O (= no steam).

3

Open the cap of the filling opening.

4

Tilt the iron backwards.

E N G L I S H

4