Philips GC3560 - Инструкция по эксплуатации - Страница 15

Problem

Possible cause

Solution

You have not 

closed the cap of 

the filling opening 

properly.

Press the cap until you hear a 

click.

Flakes and 

impurities 

come out of 

the soleplate 

during ironing.

Hard water forms 

flakes inside the 

soleplate.

Use the Calc-Clean function one 

or more times (see chapter 

‘Cleaning and maintenance’, 

section ‘Calc-Clean function’).

The 

temperature 

light flashes 

red (specific 

types only).

The 

automatic shut-off 

function has 

switched off the 

iron (see chapter 

‘Features’).

Move the iron slightly to 

deactivate the automatic shut-off 

function. The red auto-off 

indication of the temperature 

light goes out.

Water drips 

from the 

soleplate after 

the iron has 

cooled down 

or has been 

stored 

(specific types 

only)

You have put the 

iron in horizontal 

position while 

there was still 

water in the 

water tank.

Always set the steam control to 

position 0 and empty the water 

tank after use. Store the iron on 

its heel.

The iron does 

not produce a 

steam boost.

You used the 

steam boost 

function too often 

within a shor t 

period.

Continue ironing in horizontal 

position and wait a while before 

you use the steam boost function 

again..

EnGlish

15