Philips GC3111 - Инструкция по эксплуатации - Страница 6

  4 

 When the temperature light goes out, wait a while before you start 

ironing.

During ironing, the temperature light goes on from time to time. This 

indicates that the iron is heating up to the set temperature.

using the appliance 

Note: The iron may give off some smoke when you use it for the first time. This 

stops after a short while.

Steam ironing

  1 

 Make sure that there is enough water in the water tank.

 Set the recommended ironing temperature (see chapter ‘Preparing 

for use’, section ‘Setting the temperature’). 

  3 

 Set the appropriate steam setting. Make sure that the steam setting 

you select is suitable for the ironing temperature selected:

1 - 2 for moderate steam (temperature settings 

2

 to 

3

) 

3 - 4 for maximum steam (temperature settings 

3

 to MAX) 

Note: The iron starts to produce steam as soon as it has reached the 

set temperature.

ironing without steam

  1 

 Set the steam control to position 0 (= no steam).

 Set the recommended ironing temperature (see chapter ‘Preparing 

for use’, section ‘Setting the temperature’). 

Features

Spray function

You can use the spray function at any temperature to moisten the ar ticle 

to be ironed. This helps remove stubborn creases.

  1 

 Make sure that there is enough water in the water tank.

 Press the spray button several times to moisten the article to be 

ironed.

steam boost

A powerful steam boost helps remove stubborn creases. 

The steam boost function can only be used at temperature settings 

between 

2

 and MAX. 

-

-

EnGlISh

6