Philips GC2820 - Инструкция по эксплуатации - Страница 14

Guarantee 

&

 service

If you need ser vice or information or if you have a problem, please visit 

the Philips website at www.philips.com or contact the Philips Consumer 

Care Centre in your countr y (you find its phone number in the 

worldwide guarantee leaflet). If there is no Consumer Care Centre in 

your countr y, go to your local Philips dealer.

troubleshooting

This chapter summarises the most common problems you could 

encounter with the appliance. If you are unable to solve the problem with 

the information below, contact the Consumer Care Centre in your 

countr y. 

Problem

Cause

Solution

The iron is 

plugged in, but 

the soleplate is 

cold.

There is a 

connection 

problem.

Check the mains cord, the plug 

and the wall socket.

The temperature 

dial is set to MIN.

Set the temperature dial to the 

required position.

The iron does 

not produce any 

steam.

There is not 

enough water in 

the water tank.

Fill the water tank (see chapter 

‘Preparing for use’, section 

‘Filling the water tank’).

The steam control 

is set to position 0.

Set the steam position to 

$

or 

&

 (see chapter ‘Using the 

appliance’, section ‘Steam 

ironing’).

The iron is not hot 

enough and/or the 

drip-stop function 

has been activated.

Set an ironing temperature 

that is suitable for steam 

ironing ( 

2

 to MAX). Put the 

iron on its heel and wait until 

the temperature light goes out 

before you star t ironing.

EnGlISh

14

4239.000.7163.1.indd   14

20-05-09   09:02