Philips GC2305_02 - Инструкция по эксплуатации - Страница 7

the iron even for a short while: set the steam control to position
O, put the iron on its heel and remove the mains plug from the
wall socket.

◗

Place and use the iron on a stable ironing board or table.

◗

If a stand is provided with the appliance, ensure that the stand is
placed on a stable surface.

◗

This appliance is intended for household use only.

Preparing for use

Filling the water tank

1

Remove the mains plug from the wall socket.

C

2

Set the steam control to position O (= no steam).

3

Open the filling cap (specific types only).

C

4

Tilt the iron and fill the water tank up to maximum level.

Do not fill the water tank beyond the MAX indication.

5

Close the filling cap (click!) (specific types only).

If the tap water in your area is ver y hard, we advise you to use distilled
water. Do not use vinegar, starch or chemically descaled water.

Setting the temperature

◗

The iron may give off some smoke when you use it for the first
time. This will cease after a short while.

C

1

Put the iron on its heel and set the temperature dial to the

required ironing temperature by turning it to the appropriate
position.

- Check the garment label for the required ironing temperature.
-

1

Synthetic fabrics (e.g. acr ylic, viscose, polyamide, polyester)

-

1

Silk

-

2

Wool

-

3

Cotton, linen

- If you do not know what kind or kinds of fabric an ar ticle is made of,

determine the right ironing temperature by ironing a par t that will
not be visible when you wear or use the ar ticle.

- Silk, woollen and synthetic materials: iron the reverse side of the

fabric to prevent shiny patches. Avoid using the spray function to
prevent stains.

E N G L I S H

7