Maxwell MW-3051 - Инструкция по эксплуатации - Страница 11

11

ENGLISH

• 

Make sure that there is enough water in the 

water tank (10).

• 

Turn the control knob (11) to set the required 

ironing temperature: «

••

», «

•••

» or «

MAX

», 

the pilot lamp (7) will light up.

• 

When the soleplate (13) reaches the set tem-

perature, the indicator (7) will go out, you can 

start ironing.

• 

Turn the continuous steam supply knob (3) to 

the position   or 

 – steam supply is on, 

steam will start going out from the soleplate 

(13) openings.

• 

After you finish ironing, set the temperature 

control knob (11) to the position «OFF», and 

the continuous steam supply knob (3) to the 

position   – steam supply is off.

• 

Pull the power plug out of the mains socket 

and let the iron cool down completely.

ATTENTION!

If the steam is not constantly supplied during 

operation, check whether the temperature con-

trol knob (11) is set properly and there is water in 

the water tank (10).

BURST OF STEAM

The burst of steam function is useful for ironing 

folds and can only be used at high ironing tem-

peratures (when the temperature control knob 

(11) is set to the position «

••

» or «

•••

», «

МАХ

»).

• 

When pressing the burst of steam button (4) 

steam will go out of the iron soleplate more 

intensively.

Note: 

To avoid water leakage from steam open-

ings, press the burst of steam button (4) with an 

interval no less than 4-5 sec.

VERTICAL STEAM

Vertical steam function can be used only at high 

ironing temperatures (that is, when the tempera-

ture control knob (11) is set to «

•••

» or «

MAX

»).

Hold the iron vertically at the distance of 10-30  cm 

from the clothes and press the burst of steam 

button (4) with 4–5 second intervals, steam will 

be released from the soleplate (13) intensively.

IMPORTANT INFORMATION: 

Vertical steaming 

is not recommended for synthetic fabrics.

• 

To avoid fabric melting, do not touch it with 

the iron soleplate while steaming.

• 

Never steam clothes on a person as tempera-

ture of the released steam is very high, use a 

clothes hanger or a coat rack.

• 

After you finish ironing, switch the iron off, 

wait until it cools down completely, then open 

the water inlet lid (2), turn over the iron and 

pour out the remaining water.

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend 

cleaning the steam chamber regularly.

• 

Set the continuous steam supply knob (3) to 

the position  .

• 

Fill the water tank (10) up to the maximal mark 

«MAX».

• 

Place the iron on its base (9).

• 

Insert the power plug into the mains socket.

• 

Set the control knob (11) to the maximum 

soleplate temperature «

MAX

», the indicator 

(7) will light up.

• 

When the soleplate (13) reaches the desired 

temperature value, the indicator (7) will go 

out, you can start cleaning.

• 

Switch the iron off setting the tempera-

ture control knob (11) to the «OFF» position 

(SWITCHED OFF). Remove the power plug 

from the mains socket.

• 

Place the iron horizontally above the sink, set 

the continuous steam supply knob (3) to the 

position «self clean» 

and hold it.

• 

Boiling water and steam with scale will be 

released from the iron soleplate (13) open-

ings.

• 

Slightly sway the iron back and forth until all 

the water leaves the water tank (10).

• 

Release the continuous steam supply knob 

(3) and set it to the position  .

• 

Place the iron on its base (9) and let it cool 

down completely.

• 

When the iron soleplate (13) cools down com-

pletely, wipe it with a dry cloth.

• 

Before you take the iron away for storage, 

make sure that there is no water in the water 

tank (10) and that the iron soleplate (13) is 

completely dry.

CLEANING AND CARE

• 

Before cleaning the iron, make sure that it is 

unplugged and has cooled down completely.

• 

Wipe the iron body with a slightly damp cloth 

and then wipe it dry.

• 

Scale on the iron soleplate can be removed 

with a cloth soaked in the vinegar-water solu-

tion.

IM MW-3051.indd   11

10/4/17   11:45