Утюги Gorenje SGH2400BBSU - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
57
Steam and or
water come
out from under
the EASY
DECALC
knob.
The EASY
DECALC knob is
not tightened
properly.
Switch off the appliance and wait for two
hours for the steam generator to cool
down. Unscrew the EASY DECALC
knob and reattach it properly.
Note: When you remove the EASY
DECALC knob, water comes out of the
steam generator. If steam continues to
escape, switch off the appliance and
contact an authorised service centre.
Dirty water
and impurities
come out of
the soleplate.
Impurities or
chemicals present
in the water have
deposited in the
steam vents and/or
on the soleplate.
Descale the steam generator regularly.
See section Cleaning the soleplate.
Too much scale
and minerals have
accumulated inside
the steam
generator.
Descale the steam generator regularly.
See section Cleaning and maintenance.
The iron
leaves a shine
or an imprint
on the
garment.
The surface to be
ironed was uneven,
for instance
because you were
ironing over a seam
or a fold in the
garment.
The shine or imprint is not permanent
and will come off when you wash the
garment. Avoid ironing over seams or
folds, or place a cotton cloth over the
area to be ironed to avoid imprints.
The steam
generator
does not
produce any
steam.
There is not
enough water in the
water tank (the
water tank empty
light flashes).
Fill the water tank and press the steam
trigger to let the appliance heat up
again. When the ironing light is lit
continuously, you can continue with
steam ironing.
The steam
generator is not hot
enough to produce
steam.
Wait until the ironing light is lit
continuously.
You did not press
the steam trigger.
Press the steam trigger and keep it
pressed while you iron.
The water tank is
not placed properly
in the steam
generator.
Slide the water tank firmly back into the
steam generator.
The steam
generator
produces a
Water is pumped
into the boiler
inside the steam
If the pumping sound continues nonstop,
switch off the steam generator and
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
