Braun TS765EA - Инструкция по эксплуатации - Страница 10

10

The pilot light (8) goes off when the 
desired temperature is reached (after 
approx. 1 1/2 min.).

C Ironing

 Vario 

steam

You can select the steam quantity by 
turning the steam regulator (6) in a range 
from «0» to «6». 
The temperature selector has a minimum 
temperature level 2 (••).
We recommend a medium steam setting 
for all normal ironing. Only when ironing 
linen, thick cotton or similar fabrics we 
recommend the maximum steam setting.
Notice: While ironing, do not turn the 
steam regulator beyond setting «6».

Vario plus steam

For extra steam, press the steam regulator 
(6) for max. 30 seconds.
The temperature selector has a minimum 
temperature level 3 (•••).

 Precision 

shot

Prior to use, press the precision shot 
button (4) 3 to 4 times to activate it. 
Press the precision shot button in inter-
vals of at least 5 seconds for a powerful 
steam shot with preconditioning steam. 
Precision shot can be activated when 
dry ironing. However, the temperature 
selector has a minimum temperature 
level 3 (•••).
The precision shot function can also be 
used in the vertical position for steaming 
hanging clothes.
Caution: Hot steam comes out from the 
preconditioning nozzles. 

 Spray 

function

Press the spray button (5).

 Dry 

ironing

Set the steam regulator (6) on position «0» 
(= steam off).

 Automatic 

shut-off 

(only with TS 765 A, TS 785 STP model)

The «auto-off» mechanism causes a slight 
rattling noise during ironing. This is normal 
and in no case indicates a fault of the iron.
The red «auto-off» light (9) will fl ash when 
the automatic shut-off is activated.
This happens when the iron has rested: 
– horizontally on its sole plate for about 
   30 seconds or
– vertically on its heel rest for about 
   8 minutes.

To turn on the iron again, just move it. 
When the «auto-off» pilot light stops 
fl ashing, the electrical power is on again.
The automatic shut-off will be activated 
approximately 2 minutes after the iron is 
plugged into a socket.

D  Textile Protectors 

 Textile 

Protector 

(11)

 (only with 

TS 775 TP, TS 785 STP model)

The Textile Protector protects delicate 
fabrics from heat damage so that you can 
iron most fabrics without an intermediate 
cloth. A special coating avoids shiny 
patches.
With the Textile Protector, you are able to 
iron delicate fabrics with the temperature 
setting (•••) to 

«max»

, so that you can 

use all steam functions your iron offers.
To check the reaction of your fabrics 
before you start ironing, we recommend 
that you iron a small section of material on 
the reverse side. However, in order not to 
damage the coating, avoid ironing over 
e.g. zippers, metal buttons/rivets or strass 
with the Textile Protector attached.
After having attached the Textile 
Protector, wait about 1 1/2 minutes before 
you start ironing. 

Soft Textile Protector 

(12)

 (only with 

TS 785 STP model)

The Soft Textile Protector ensures an 
increased heat protection and utmost 
care for most delicate fabrics thanks to its 
specially designed SoftTouch cushion. 
Even most delicate, ironable* fabrics are 
protected against heat damage and shiny 
patches are avoided. 
With the Soft Textile Protector attached, 
you can iron all ironable fabrics without an 
intermediate cloth. The Soft Textile 
Protector is perfectly suited for touching 
up e.g. creases of delicate business suits 
without having to use an ironing cloth. 

With the Soft Textile Protector , you are 
able to iron delicate fabrics with the 
temperature setting (•••) to 

«max»

, so 

that you can use all steam functions your 
iron offers.
However, in order not to damage the 
SoftTouch cushion, avoid ironing over e.g. 
zippers, metal buttons/rivets or strass 
with the Soft Textile Protector attached.

(* in order to know whether a piece of 
garment is ironable, please refer to its care 
label.)

E  After ironing

Unplug the iron and turn the steam 
regulator to position «0». To prolong the 
life of the iron, empty the water tank. 
Store the cool iron in a dry place always 
standing on its heel rest.

F   Maintenance and cleaning

To clean the sole plate, use steel wool. 
Never use a scouring pad, vinegar or 

5712710054_TS_780-755_S06-80.indd   10

5712710054_TS_780-755_S06-80.indd   10

07.05.13   09:02

07.05.13   09:02