Braun TexStyle TS745A - Инструкция по эксплуатации - Страница 10

10

C Ironing

Vario steam

You can select the steam quantity by 
turning the steam regulator (6) in a range 
from «0» to «6». 
The temperature selector has a minimum 
temperature level 2 (••).
We recommend a medium steam setting 
for all normal ironing. Only when ironing 
linen, thick cotton or similar fabrics we 
recommend the maximum steam setting.
Notice: While ironing, do not turn the 
steam regulator beyond setting «6».

Vario plus steam

For extra steam, press the steam regulator 
(6) for max. 30 seconds.
The temperature selector has a minimum 
temperature level 3 (•••).

Precision Shot

Prior to use, press the Precision Shot 
button (4) 3 to 4 times to activate it. 
Press the Precision Shot button in inter-
vals of at least 5 seconds for a powerful 
steam shot with preconditioning steam. 
Precision Shot can be activated when dry 
ironing. However, the temperature selector  
has a minimum temperature  level 3 (•••).
The Precision Shot function can also be 
used in the vertical position for steaming 
hanging clothes.
Caution: Hot steam comes out from the 
preconditioning nozzles. 

Spray function

Press the spray button (5).

Dry ironing

Set the steam regulator (6) on position «0» 
(= steam off).

 Automatic 

shut-off 

(only with TS 745 A model)

The «auto-off» mechanism causes a slight 
rattling noise during ironing. This is normal 
and in no case indicates a fault of the iron.
The red «auto-off» light (9) will fl ash when 
the automatic shut-off is activated.
This happens when the iron has rested: 
– horizontally on its sole plate for about 
   30 seconds or
– vertically on its heel rest for about 
   8 minutes.

To turn on the iron again, just move it. 
When the «auto-off» pilot light stops 
fl ashing, the electrical power is on again.
The automatic shut-off will be activated 
approximately 2 minutes after the iron is 
plugged into a socket.

D Textile Protector 

(only with TS 735 TP model

Before attaching the Textile Protector (10) 
for the fi rst time, iron approximately 

2 minutes without Textile Protector. The 
Braun Textile Protector protects delicate 
fabrics from heat damage and makes it 
possible to iron most dark fabrics without 
an intermediate cloth. 
A special coating avoids shiny patches. 
However, in order not to damage the 
coating, avoid ironing over e.g. zippers, 
metal buttons/rivets or strass with the 
Textile Protector attached. 
To check the reaction of your fabrics 
before you start ironing, we recommend 
that you iron a small section of material on 
the reverse side. With the Textile Protector 
, you are able to iron delicate fabrics with 
the temperature setting (•••) to 

«max»

, so 

that you can use all steam functions your 
iron offers.
After having attached the Textile Protector, 
wait about 1 1/2 minutes before you start 
ironing. Always store your iron with the 
Textile Protector detached.

E After ironing

Unplug the iron and turn the steam 
regulator to position «0». To prolong the 
life of the iron, empty the water tank. 
Store the cool iron in a dry place always 
standing on its heel rest.

F  Maintenance and cleaning

To clean the sole plate, use steel wool. 
Never use a scouring pad, vinegar or 
other chemicals. 

G  Cleaning the anticalc valve 

The anticalc valve located on the lower 
end of the steam regulator has to be 
decalcifi ed regularly (e.g. whenever steam 
development is insuffi cient). For this, the 
water tank has to be empty.

Removing the steam regulator with the 
anticalc valve
Turn the steam regulator clockwise 
towards the steam setting «6». Keep 
on turning fi rmly beyond the resistance 
until the steam regulator is lifted. When 
positioned at 

x

, pull it out vertically. 

Do not touch the anticalc valve at its lower 
end. Immerse the anticalc valve in vinegar 
(not vinegar essence) or lemon juice for 
a minimum of 30 minutes. Brush off 
remaining residues and rinse under 
running water (fi g. G, 1-7).

Re-inserting the steam regulator
When re-inserting the steam regulator, 
make sure the steam regulator base still 
points on setting 

x

 (fi g. G 8). Firmly push 

down the steam regulator until it turns 
back to setting «6» (fi g. G) where it 
catches. 
Notice: The iron must never be used 
without steam regulator.

5712710044_TS_745-715_S06-76.indd   10

5712710044_TS_745-715_S06-76.indd   10

08.05.13   14:33

08.05.13   14:33