Утюги Braun SI7160BL (12770008) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
14
Under no circumstances shall the application of this
guarantee give rise to the complete replacement of
the appliance or entitle the consumer to damages.
Braun Household, New Lane, Havant,
Hampshire PO9 2NH
www.braunhousehold.co.uk
Thank You for choosing Braun. We are confident
that you will get excellent service from this product.
TO IMPROVE YOUR EXPERIENCE
Register now at www.braunhousehold.co.uk
By registering we may send you from time to time
details on exclusive offers, promotions, recipes and
inside tips.
Troubleshooting Guide
SI 71xx
SI 92xx
PROBLEM
SOLUTION
Water droplets drip on the fabric
during ironing
Press the water tank lid and check if it is closed
Check that the temperature
selector is at least on
••
. Select a
higher temperature setting. Take
longer intervals when pressing the
steam shot button.
Take longer intervals when pressing
the steam shot button.
If chemicals have been put into the water tank, empty the water tank, rinse
it 2-3 times.
The iron produces little or no
steam
Check water level and refi ll tank
Perform descaling procedure
Check that the temperature
selector is at least on
••
.
Wait until the iron heats up and
the temperature control LED is
permanently ON.
Flakes and white impurities
come out of the soleplate
during ironing
Perform the descaling procedure
The spray function or the steam
shot do not work properly
Refi ll the water tank
Soleplate is not heating up
Unplug the iron and plug in again.
Rotate the temperature selector
from «min» to «max». Then select
the desired temperature.
n/a
The temperature control LED
turns permanently on
n/a
Unplug the iron and plug in again.
If the problem does not disappear
contact the Braun customer service.
Water droplets drip from the
soleplate after the iron has been
unplugged or has been stored
Set the steam regulator to
«0»
Empty the water tank after ironing and place the iron vertically on a stable
surface during cooling down
Français
Avant utilisation
Lisez attentivement toutes les instructions
avant d’utiliser l’appareil.
Attention : A cause de la haute perfor-
mance de cette centrale vapeur, veuillez
vous assurer que votre réseau électrique
5712710801_SI71xx_SI92xx_INT.indd 14
5712710801_SI71xx_SI92xx_INT.indd 14
19.02.21 10:36
19.02.21 10:36
