Braun SI7042GR - Инструкция по эксплуатации - Страница 13

Troubleshooting Guide 

PROBLEM

POSSIBLE  CAUSES

SOLUTION

Water droplets drip on the 

fabric during ironing.

The water tank lid is not properly 

closed.

Press the water tank lid and check 

if it is closed .

Chemicals have been put into the 

water tank 

Never put chemicals or perfumes 

into the water tank. Empty the 

water tank, rinse it 2-3 times.

The steam trigger is overused .

Wait a few seconds between each 

use. Check that the temperature 

selector is at least on 

••

.

The iron  produces little or no 

steam.

The water tank is empty.

Refill the water tank. 

The valve has collected too much 

limescale.

Clean the valve.

Temperature is not high enough and 

anti-drip function automatically gets 

activated to avoid water drops.

Check that the temperature 

selector is at least on

••

.

Flakes and white impurities 

come out during ironing.

The iron has limescale formations 

inside the steam chamber.

Run the descaling procedure 

(clean the steam chamber and the 

valve).

The spray function or the 

steam shot do not work 

properly.

The water tank is empty.

Refill the water tank.

Subject to change without notice.

Please do not dispose of the product in the household waste at the end of its useful 

life. Disposal can take place at a Braun Service Centre or at appropriate collection 

points provided in your country.

11

DLB253489_5712710601_SI7_UI_INT.indb   11

21.12.16   09:51