Braun 12790004-SI9281BK - Инструкция по эксплуатации - Страница 11

(A) Start ironing

Filling the water tank

• 

Make sure that the appliance is switched 

off and unplugged.

• 

Fill the water tank with tap water by 

holding the iron slightly inclined, taking 

care not to exceed the  “max” level. If you 

have extremely hard water, we recom-

mend that you use a mixture of 50 % tap 

water and 50 % distilled water.

•  Attention:

 Never use distilled water 

exclusively. Do not add any additives (e.g. 

starch). Do not use condensation water 

from a tumble dryer.

Ironing with steam 

• 

Place the iron on its heel rest (9) and  

plug in.

• 

The iron will start to heat up and the 

temperature control LED (7) on the iron 

will blink.

• 

Once the temperature has been reached, 

the temperature control LED turns 

permanently on. Thanks to the ultimate 

iCare technology,

 it is possible to iron 

with one temperature setting, which is 

perfectly suitable for all garments, without 

damaging even delicate garments. 

Steam options:

•  Continuous steam (normal) 

Select the steam quantity by turning the 

steam regulator (4) in a range from «1» to 

«6». We recommend a medium steam 

setting for regular ironing. Only when 

ironing tough fabrics like linen, thick 

cotton or jeans it is recommended to use 

the maximum steam setting. 

Note: 

While ironing, do not turn the steam 

regulator beyond setting «6».

•   Continuous steam (turbo)

When the steam regulator is positioned 

anywhere between «0» and «6» it is 

possible to activate the turbo function by 

pressing the turbo steam button (5) in 

order to emit the highest steam output 

and remove stubborn creases. 

Press the turbo steam button for not more 

than 30 seconds. 

•   Steam  shot

Prior to use, press the steam shot trigger 

(6) 3 to 4 times to activate it. 

• 

For a powerful boost of steam, press the 

steam shot trigger at intervals of a few 

seconds.

• 

It is possible to use the steam shot 

function by holding the iron in a 

vertical 

position

 and pulling the steam shot 

trigger. This is useful for removing creases 

from hanging clothes, curtains etc.

Spray function 

The spray function (3) produces a fine mist 

that evenly moistens the fabric and makes it 

easier to iron out creases on very tough 

textiles.  

Dry ironing

Set the steam regulator (4) on position «0» 

(= steam off). 

3D soleplate

The unique round shape of the 3D soleplate 

ensures best gliding results on difficult parts 

(e. g. buttons, pockets etc.) and in all 

directions – even backwards.  

(B) Auto off

For safety and reduced power consumption, 

the auto-off function is automatically 

activated when the iron is positioned 

horizontally on its soleplate for about 1 

minute or vertically on its heel rest for about 

8 minutes.

• 

When the iron is in the auto-off mode the 

temperature control LED (7) is blinking.

• 

To turn the iron on again, just move it 

forward. 

• 

Before start ironing again wait until the 

temperature control LED is turned on.

(C) After ironing 

• 

Unplug the iron and empty the water tank.

• 

Let the iron cool down before storing. 

(D) Descaling 

Preparation

1.  Set the steam regulator (4) on position 

«0» (= steam off).

2.  Fill the water tank. 

3.  Plug in.

4.  Wait until the temperature control LED 

(7) turns permanently on and unplug the 

iron. Hold the iron over the sink. 

5.  Turn the steam regulator clockwise 

beyond steam stetting «6».  When you 

hear a click pull it out vertically until the 

end of the spring appears. It must not be 

removed completely.   

Self clean 

6.  Move the appliance over the sink. Hot 

water and steam will come out from the 

soleplate along with the calc particles 

from the steam chamber.  Repeat 1.-6. 

9

DLB253492_5712710611_SI9_UI_INT.indb   9

21.12.16   10:09