Sony STR-DE545 - Инструкция по эксплуатации - Страница 46

46

GB

Other Operations

Recording on a video tape

You can record from a TV, or an LD player using the
receiver. You can also add audio from a variety of audio
sources when editing a video tape. See your LD player ’s
instruction manual if you need help.

1

Select the program source to be recorded.

2

Prepare the component for playing.

For example, insert the laser disc you want to record
into the LD player.

3

Insert a blank video tape into the VCR for
recording.

4

Start recording on the recording VCR, then start
playing the laser disc you want to record.

z

You can record the sound from any audio source onto a

video tape while recording from a laser disc

Locate the point where you want to start recording from another
audio source, select the program source, then start playback. The
audio from that source will be recorded onto the audio track of
the video tape instead of the audio from the original medium.

To resume audio recording from the original medium, select the
video source again.

Note

Please be sure to make both digital and analog connections to the
DVD/LD inputs. Analog recording is not possible if you only
make digital connections.

Using the Sleep Timer

You can set the receiver to turn off automatically at a
specified time.

Press SLEEP on the remote while the power is on.

Each time you press SLEEP, the time changes as shown
below.

n

 2:00:00 

n

 1:30:00

n

 1:00:00 

n

 0:30:00 

n

 OFF

The display dims after you have specified the time.

z

You can freely specify the time

First, press SLEEP on the remote, then specify the time you want
using the jog dial on the receiver. The sleep time changes in 1
minute intervals. You can specify up to 5 hours.

z

You can check the time remaining before the receiver turns

off

Press SLEEP on the remote. The remaining time appears in the
display.

Recording