Sony STR-DE545 - Инструкция по эксплуатации - Страница 35

35

GB

Enjoying Sur

round Sound

Dynamic range compressor (COMP. 

D. RANGE

xx)

Initial setting : OFF
Lets you compress the dynamic range of the sound track.
This may be useful when you want to watch movies at
low volumes late at night.
• OFF reproduces the sound track with no compression.
• STD reproduces the sound track with the dynamic

range intended by the recording engineer.

• 0.1 ~ 0.9 allow you to compress the dynamic range in

small steps to achieve the sound you want.

• MAX provides a dramatic compression of the dynamic

range.

Note

Dynamic range compression is not possible with DTS sources.

z

About the Dynamic Range Compressor

This parameter allows you to compress the dynamic range of the
soundtrack based on the dynamic range information included in
the Dolby Digital signal. “STD” is standard compression, but
because many sources have only light compression, you may not
notice much difference when using 0.1~0.9.
Therefore, we recommend using the “MAX” setting. This greatly
compresses the dynamic range and allows you to view movies
late at night at low volumes. Unlike analog limiters, the levels are
predetermined and it provides a very natural compression.

Adjusting the bass/treble

The BASS/TREBLE button lets you adjust the tone (bass
or treble) of the front speakers for optimum sound. You
can adjust the tone for each separate sound field.

1

Start playing a program source encoded with multi
channel surround sound.

2

Press BASS/TREBLE.

The button lights up and the first parameter is
displayed.

3

Press the cursor buttons (

 or 

) to select the

parameter you want to adjust.

4

Turn the jog dial to select the setting you want.

The setting is stored automatically.
You can select a tone level of -6 dB to +6 dB in 2 dB
steps.

5

Press TONE so that the TONE indicator lights up.

z

You can turn off the tone without erasing it

The tone settings are stored separately for each sound field. Press
the TONE button to turn the TONE indicator off.

Resetting customized sound fields to the
factory settings

1

If the power is on, press 

?

/

1

 to turn off the power.

2

Hold down MODE and press 

?

/

1

.

“SUR CLR” appears in the display and all sound fields
are reset at once.